Author Topic: Applying finish over the glass  (Read 644 times)

Offline arachnid

  • Trad Bowhunter
  • **
  • Posts: 400
Applying finish over the glass
« on: August 18, 2017, 09:42:00 AM »
Hi Guys.

A quick question- I use a simple water based laquer which I apply with a brush over the bow.
Do I apply it over the glaas too or just over the wooden patrs (mainly- the riser)?


And, if you have tip for finishing the bow with laquer (I don`t have anything else)- it`ll be great.

Thanks

Dor

Online Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15027
Re: Applying finish over the glass
« Reply #1 on: August 18, 2017, 11:05:00 AM »
Dor, the finish should go on the whole bow so you get an encapsulated seal.
 I've never used lacquer finish but I believe you'll get the best results with a spray on finish. If the lacquer has self leveling properties it may work for you.
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©