Author Topic: Tillering Sequence (wood bows)  (Read 1827 times)

Offline John Malone

  • Trad Bowhunter
  • **
  • Posts: 699
Re: Tillering Sequence (wood bows)
« Reply #20 on: February 12, 2018, 09:54:00 AM »
My first bow had 3 plus inches of set. 1.5 Id call a victory.
Life is to short to pass up anything that could potentially be bow wood!

Offline fujimo

  • Trad Bowhunter
  • **
  • Posts: 3619
Re: Tillering Sequence (wood bows)
« Reply #21 on: February 12, 2018, 12:32:00 PM »
hey mike, take it easy mate.    :)    
i never said you said or didnt say anything.

i didnt, and dont disagree with your tillering method- it obviously works.


all i was doing, was stating my own opinion and agreeing with the way Pat and Roy tiller their bows. As, through time i have seen the pitfalls, and have adjusted my tillering technique to suit.

If i disagreed with you, I would do you the courtesy and I would tell you. Period.
i am not about to turn this thread or this site into a facebook battleground.
Peace out!   :)    :)

Offline George Tsoukalas

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 2922
Re: Tillering Sequence (wood bows)
« Reply #22 on: February 12, 2018, 01:26:00 PM »
I want the bend to start at the end of the fades and increase outward for elliptical tiller and spend hours making sure that happens.

I also like the last 6 inches stiff.

Jawge

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©