3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: Fletching Orientation  (Read 1891 times)

Offline BWallace10327

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 854
Fletching Orientation
« on: July 17, 2018, 08:58:49 PM »
  Has anyone noticed an impact on arrow flight by gluing the feathers closer or farther from the nock?   I like to keep mine about 1" away from the nock, but only for aesthetics. 
***$ Brent Wallace $***
NRA Life Time Member

Online Orion

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 8261
  • Contributing Member
Re: Fletching Orientation
« Reply #1 on: July 17, 2018, 09:09:48 PM »
Need to have the fletch start far enough in front of the nock so you can get your fingers on the string without contacting the feathers (noise).  Other than that, the farther back they are, the more effect they have, but a quarter inch one way or another doesn't make enough difference to worry about.  Feather number, shape, size, hight, amount of offset/helical, etc. all have more influence on arrow flight.

Offline Fattony77

  • Trad Bowhunter
  • **
  • Posts: 1226
Re: Fletching Orientation
« Reply #2 on: July 17, 2018, 09:32:16 PM »
I use the feather-to-nose secondary anchor point, so mine have to be quite a bit further forward than the average distance I've seen on other people's arrows. In fact, I had to stop using 5" feathers because I couldn't fletch them right in my jigs (Bitz & BPE). So, I 4-fletch 4" feathers. But I don't see any difference in flight. Then again, it might be because I suck no matter how my arrow is fletched.  :biglaugh:

Online Deno

  • Trad Bowhunter
  • **
  • Posts: 884
Re: Fletching Orientation
« Reply #3 on: July 17, 2018, 10:33:15 PM »
I echo what Orion said above.    I also use my feathers to gauge my proper brace height.

Tony that's some funny stuff !

Deno
« Last Edit: July 18, 2018, 06:23:28 AM by Deno »
United Bowhunters of New Jersey
Traditional Archers of New Jersey
Traditional Archery Society
Howard Hill Wesley Special 70#
Howard Hill Big 5  65#

Offline Friend

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 8135
Re: Fletching Orientation
« Reply #4 on: July 17, 2018, 10:42:57 PM »
The back of my fletch to the nock throat is  approximately 2"s.
>>----> Friend <----<<

My Lands… Are Where My Dead Lie Buried.......Crazy Horse

Offline creekwood

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 831
Re: Fletching Orientation
« Reply #5 on: July 17, 2018, 10:43:24 PM »
  Has anyone noticed an impact on arrow flight by gluing the feathers closer or farther from the nock?


No.

Online McDave

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6086
Re: Fletching Orientation
« Reply #6 on: July 17, 2018, 11:34:28 PM »
The back of my fletch to the nock throat is  approximately 2"s.

Mine are the same.  No doubt, at some point it would make a difference in arrow flight, but the difference between 3/4” and 2” makes no difference, as far as I can tell.
TGMM Family of the Bow

Technology....the knack of arranging the world so that we don't have to experience it.

Offline Hoosierarcher88

  • Trad Bowhunter
  • **
  • Posts: 658
Re: Fletching Orientation
« Reply #7 on: July 18, 2018, 04:20:25 AM »
Ive never measured the distance on mine but i always fletch mine just far enough forward to avoid face contact with the feather. Not much breaks my concentration more than a feather tickling my mustache hair.
Northern mist Shelton 66" 53# @ 28"

Offline Red Beastmaster

  • Trad Bowhunter
  • **
  • Posts: 1766
Re: Fletching Orientation
« Reply #8 on: July 18, 2018, 07:43:20 AM »
After making well over a thousand arrows in my life I can't say that I ever thought or cared about it.
There is no great fun, satisfaction, or joy derived from doing something that's easy.  Coach John Wooden

Users currently browsing this topic:

0 Members and 3 Guests are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©