xx75 with swagged end

[Bear Heart]

trying to find the best place to buy non legacy shafts, too pricey, xx75 with swagged not uni bushing.  sorry about all lower case, holding sleeping baby in the other arm

[JRY309]

I believe the only non uni-bushing shafts Easton makes now is the Legacy and that is all that is listed in their 2007 catalog.Unless you can find some close-outs on older Easton shafts or look for some used arrows.There is only a $5 difference in XX75 shafts I've seen except the new Gamegetter XX75 black shafts but they have the uni-bushing set up.

[Killdeer]

I had to go to the Jazz shafts to get the 2013s.

Killdeer  :(

[Bear Heart]

I shoot 2117.  Those Jazz shafts are the blue ones right?  I will shoot any color, I just want what is under the paint job to be up to specs.  I am getting tired of my wood arrows wanting to fall off my string after I have been shooting aluminum with unibushings.

[bayoulongbowman]

Blues arrow not jazz...2016's

[Killdeer]

Jazzes are purple. They look ral spiffy in yellow and hot pink!

Killdeer  

[PHANTOM_84]

At the archery pro shop I work at we sell the new black easton gamegetter. They have the swaged ends with glue on nocks and come in three sizes 500-2016's, 400-2117's, and 340-2315's. I be shooting the 500 for several months now and they are a good quality shaft for the money.

[Bear Heart]

All the XX75 are the same quality right?

[JRY309]

Yes all XX75 are the same,thet are made from7075-T9 alloy.But the XX75 camo are rated at 96,000 psi strength and XX75 Legacy are rated at 95,000 psi strength.I believe that is from the use of the uni-bushing system.I used to like the swaged shafts my self but prefer the uni-bushings now.With uni-bushing I like 3D Super nocks for they are tunable and have the largest and deepest throat of those types of nocks.They fit my strings and I believe they strengthen the shaft end.I hit 4 last year and all I had to do was pull ot the nock and press another one in,no problem.

[Jim Harris]

You might want to check with fsdiscountarchery.com. They may have some of the shafts you are looking for. I am not sure if they are a sponser here. Jim.

[Bear Heart]

I'll have to check out those 3d super nocks.  Thanks to all