Author Topic: shaft length of .600 spine carbons? (Read 349 times)

Mark Hedges · « **on:** March 29, 2008, 08:48:00 AM »

does anybody make a carbon arrow with a spine of around .600 in long 31"+ length? This would be for target shooting only. So far I have found eastons redline arrows which I think are 31" max at .600 spine but they are kind of expensive.

Thanks,

Mark

RamiusEng · « **Reply #1 on:** March 29, 2008, 09:01:00 AM »

Easton ST EPIC 600. They come in 30 3/8" shafts. Is this the kinda thing you were looking for?

Shawn Leonard · « **Reply #2 on:** March 29, 2008, 09:28:00 AM »

GT Entrada as well, I believe they come 32"s. Shawn

wapiti · « **Reply #3 on:** March 29, 2008, 11:10:00 AM »

Easton ST Epic 600. Fly very well from my Whip with 125 grain point. 52#@28"

R H Clark · « **Reply #4 on:** March 29, 2008, 11:35:00 AM »

Beman ICS Energy are the same as Redline except .006 straight and $60 a dozen.

Mark Hedges · « **Reply #5 on:** March 29, 2008, 01:12:00 PM »

thanks I'll check out those bemans. The gold tip shafts are 30" for 600 and 500 and 32" for stiffer.

Cherokee Scout · « **Reply #6 on:** March 30, 2008, 09:32:00 PM »

Gold Tip Entrada 600s are 30.5" from the throat of the nock.

News:

Author Topic: shaft length of .600 spine carbons? (Read 349 times)

Mark Hedges

shaft length of .600 spine carbons?

RamiusEng

Re: shaft length of .600 spine carbons?

Shawn Leonard

Re: shaft length of .600 spine carbons?

wapiti

Re: shaft length of .600 spine carbons?

R H Clark

Re: shaft length of .600 spine carbons?

Mark Hedges

Re: shaft length of .600 spine carbons?

Cherokee Scout

Re: shaft length of .600 spine carbons?

Users currently browsing this topic:


LEFT HAND BOWS CLASSIFIEDS	TRAD GANG CLASSIFIEDS ACCESS	RIGHT HAND BOWS CLASSIFIEDS