Author Topic: Limb pads. (Read 1698 times)

Buemaker · « **on:** April 29, 2019, 03:43:14 PM »

How do you shape, cut, grind your limb pads on a takedown?

jess stuart · « **Reply #1 on:** April 29, 2019, 05:47:07 PM »

I cut them with a jig on my table saw.

kennym · « **Reply #2 on:** April 29, 2019, 05:59:33 PM »

Yep jig on table saw, gets them the most square with riser block...

Buemaker · « **Reply #3 on:** April 29, 2019, 06:24:34 PM »

Just to answer myself, I do it this way. Cut it to the line on the bandsaw and then one pass on the jointer.

monterey · « **Reply #4 on:** April 29, 2019, 06:35:20 PM »

If I had a jointer I'd do that too.

Roy from Pa · « **Reply #5 on:** April 29, 2019, 06:51:26 PM »

I like that safety guard there, Bue..

Crittergetter · « **Reply #6 on:** April 29, 2019, 08:49:37 PM »

I rough them out on the band saw and then clamp them in a jig for the profile sander. I had a CNC shop cut out my patterns out of 1/4” aluminum.

Crooked Stic · « **Reply #7 on:** April 29, 2019, 08:55:58 PM »

I also use bandsaw then jig on profile sander. As of late I have been putting .040 glass after profiling.

Sent from my SM-J737V using Tapatalk

TradBowyer · « **Reply #8 on:** April 30, 2019, 01:11:52 PM »

I draw my lines on the riser, cut on bandsaw and then flatten the pads on my edge sander.

Crooked Stic · « **Reply #9 on:** April 30, 2019, 02:26:29 PM »

My jig.

Sent from my SM-J737V using Tapatalk

Buemaker · « **Reply #10 on:** April 30, 2019, 04:36:31 PM »

Nice jig there Stic.

beachbowhunter · « **Reply #11 on:** April 30, 2019, 04:38:17 PM »

Yep jig on table saw, gets them the most square with riser block...

x3

News: