Author Topic: Using glues and expoxies  (Read 1423 times)

Offline Wolftrail

  • Trad Bowhunter
  • **
  • Posts: 1152
Using glues and expoxies
« on: May 20, 2019, 09:34:00 PM »
I have made phenolic with linen and epoxy using a small piece of melamine wood and plastic wrap for the release.  Would using plastic resin release just the same.

Offline Flem

  • Trad Bowhunter
  • **
  • Posts: 2985
  • "Don't quote me on that!"
Re: Using glues and expoxies
« Reply #1 on: May 20, 2019, 10:44:23 PM »
Not sure what you are referring too, but I can tell you that epoxy releases cleanly from UHMW, HDPE and LDPE plastic. Not so much with polycarbonate and other hard plastics.

Online Crooked Stic

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6075
Re: Using glues and expoxies
« Reply #2 on: May 21, 2019, 09:47:07 AM »
When I do the two piece bows I use Johnsons paste wax as release. Doing the pnenolic  Just cover your backing pieces with plastic wrap.
High on Archery.

Offline Wolftrail

  • Trad Bowhunter
  • **
  • Posts: 1152
Re: Using glues and expoxies
« Reply #3 on: May 21, 2019, 11:07:53 AM »
I think you guys answered my question weather the material will release cleanly from the plastic resin.   "..........cover your backing pieces with plastic wrap..."  yes that's exactly what I did previously using epoxy and worked like a charm.   Just was not sure about Welwood plastic resin.

Offline Flem

  • Trad Bowhunter
  • **
  • Posts: 2985
  • "Don't quote me on that!"
Re: Using glues and expoxies
« Reply #4 on: May 21, 2019, 12:02:07 PM »
Sorry, I had a feeling you might be talking about something other than form materials. Never used Weldwood
Plastic Resin Glue for anything other than an adhesive. Are you thinking of making a composite with fiber and Weldwood?

Offline Wolftrail

  • Trad Bowhunter
  • **
  • Posts: 1152
Re: Using glues and expoxies
« Reply #5 on: May 21, 2019, 03:48:28 PM »
"a composite"  no I make only wood bows I would be gluing the riser pieces and lams.

Offline Flem

  • Trad Bowhunter
  • **
  • Posts: 2985
  • "Don't quote me on that!"
Re: Using glues and expoxies
« Reply #6 on: May 21, 2019, 08:54:57 PM »
Ok, "What we got here is a failure to communicate"
You referenced making phenolic in your opening post, so of course that is what I have been referring too during this thread. When I said composite, I was referring to phenolic, micarta, etc.
So my question to you is, what are you planning on doing with Weldwood plastic resin glue?

Offline Wolftrail

  • Trad Bowhunter
  • **
  • Posts: 1152
Re: Using glues and expoxies
« Reply #7 on: May 21, 2019, 10:32:26 PM »
Epoxy and linen is phenolic is it not...…….  I'm just referring to the glues process, will it stick to the poly.  And Crooked basically answered it.  As I wrote  "Would using plastic resin release just the same. "   

"what are you planning on doing with Weldwood plastic resin glue?"  like I wrote  "I would be gluing the riser pieces and lams."   that's it...! could be wood could be linen.

Offline Flem

  • Trad Bowhunter
  • **
  • Posts: 2985
  • "Don't quote me on that!"
Re: Using glues and expoxies
« Reply #8 on: May 21, 2019, 10:49:51 PM »
 :thumbsup: Got it. Sorry I did not read your post as well as I should have. 

Offline Wolftrail

  • Trad Bowhunter
  • **
  • Posts: 1152
Re: Using glues and expoxies
« Reply #9 on: May 21, 2019, 11:03:39 PM »
Lol...….I'm the same way some days I should read instead of look or gaze into space.

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©