Author Topic: when to move from long string to short string?  (Read 1183 times)

Offline ozy clint

  • Trad Bowhunter
  • **
  • Posts: 2665
when to move from long string to short string?
« on: November 02, 2019, 10:21:40 PM »
i have a molegabet in the works. the target draw weight is 65-70#@28". i currently have it bending pretty evenly with a long string. the tips move back to where, if it had a short string it would have it braced at 4". it's at 70# on the long string at this 4".

keeping in mind that you shouldn't draw it such that you exceed the target weight, i've confused myself as to when to move to a short string.

if it is pulling 70#@4" on the long string then i put a short string on it, is that not over stressing it when i start pulling it with a short string even though the bow scale will read near zero as i start to pull it?

should i move to a short string now?

i guess what i'm getting at is do you start off near the target weight at a very short draw and remove wood to maintain tiller and increase the draw length while not going over the target weight until you reach the target draw length or do you start off under weight and tiller it hoping that the target weight it reached when you get back to the desired draw length?
Thick fog slowly lifts
Jagged peaks and hairy beast
Food for soul and body.

Border black douglas recurve 70# and 58# HEX6 BB2 limbs

Online Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15027
Re: when to move from long string to short string?
« Reply #1 on: November 02, 2019, 10:56:04 PM »
You are at about 125#@28" now. Figure about 3# per inch of pull.
 If both limbs are bending evenly and together then it's OK to go to low brace...if you can brace it.   :notworthy:
If you keep pulling to 70# you won't be under weight at full draw but watch for the limbs taking set. If you notice string follow(set) you are over stressing the limbs.
 I like to get off the long string as soon as possible. It's too easy to get false readings because of the angle the long string pulls the limbs down. Once you are at low brace you can see how the string tracks and how the limbs are bending and acting, ie. twist, hinges. etc.
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Offline Mad Max

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6565
Re: when to move from long string to short string?
« Reply #2 on: November 03, 2019, 08:17:07 AM »
How long is the bow?
How long is the long string in inches?
I would rather fail at something above my means, than to succeed at something  beneath my means  
}}}}===============>>

Offline Mad Max

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6565
Re: when to move from long string to short string?
« Reply #3 on: November 03, 2019, 08:23:11 AM »
Or, I like to use a string as short as I can get without bracing to start with, after floor tiller.
I would rather fail at something above my means, than to succeed at something  beneath my means  
}}}}===============>>

Offline ozy clint

  • Trad Bowhunter
  • **
  • Posts: 2665
Re: when to move from long string to short string?
« Reply #4 on: November 03, 2019, 03:45:09 PM »
bow is 64" NTN. long string is 74"
Thick fog slowly lifts
Jagged peaks and hairy beast
Food for soul and body.

Border black douglas recurve 70# and 58# HEX6 BB2 limbs

Online Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15027
Re: when to move from long string to short string?
« Reply #5 on: November 03, 2019, 05:22:12 PM »
Shorten your long string so it just fits the bow. This will give you a more accurate assessment.
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Offline Mad Max

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6565
Re: when to move from long string to short string?
« Reply #6 on: November 04, 2019, 08:09:14 AM »
x2 on what pat said
I would rather fail at something above my means, than to succeed at something  beneath my means  
}}}}===============>>

Online Roy from Pa

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 20685
Re: when to move from long string to short string?
« Reply #7 on: November 04, 2019, 08:11:15 AM »
Yup.
My long string lays snug tight against the belly when tillering.

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©