Another fadeout issue/question

[Crooked Stic]

I would be sure the next wedges were thin enough to see light thru on the very end. Make a dry run and check if you see light thru that area.Ideal is your hose dog bone shaped from end view
. If you got light then you need to reduce the space there.

[Tim Finley]

Did you run a square across your forms to see if there is a dip . You will want to put some wood pieces (2" by what ever width you bow is ) above your hose where the end of the fade out is make it tight before you blow up your hose, this will create  more pressure at that point .

[buckeyebowhunter]

Thanks again for all the tips guys. Still waiting on glass 

[Crooked Stic]

It won't make any more pressure. It will make what pressure you have press tighter in that area.

[Badlands]

I've had it happen from time to time over the years.  I've always made my own fades but sometimes I epoxy a piece of glass on the flat side and then grind that to a feather thin edge.  It seems to be easier to get it see through thin and it's a little tougher than wood.

[buckeyebowhunter]

That looks nice Brad 

[Tim Finley]

same thing