3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: Hickory shafting  (Read 1602 times)

Offline The Vanilla Gorilla

  • Trad Bowhunter
  • **
  • Posts: 906
Hickory shafting
« on: January 03, 2021, 09:16:46 PM »
I’m considering going back to wood arrows for a couple of my longbows.  I always liked  shooting 5/16 POC.

I thought about giving hickory shafting a try this time. For those of yall who have shot hickory,  what can I expect as far as a comparison with POC?

Thanks!

Online Cory Mattson

  • Global Moderator
  • Trad Bowhunter
  • ****
  • Posts: 3765
Re: Hickory shafting
« Reply #1 on: January 03, 2021, 09:36:07 PM »
Hickory is so much stronger there is no comparison. Hickory is far superior for hunting IMO. I used to make 2 dozen at a time and they were completely dependable and last a long time. They are not 100% straight but I could get them to spin like a top after mounting broadheads and had no trouble shooting game. I could get Hickory in my preferred weights (heavier than 10 gpi) and Hickory was very quiet when shot. 

POC smells good and is straight and easy to straighten. I've seen dozens of POC arrows break at or just behind the broadhead and I have never seen that with Hickory.
Savannah River Bow Zone - Trad only Bowhunting Clubs and Camps

Offline The Vanilla Gorilla

  • Trad Bowhunter
  • **
  • Posts: 906
Re: Hickory shafting
« Reply #2 on: January 03, 2021, 10:14:07 PM »

POC smells good and is straight and easy to straighten. I've seen dozens of POC arrows break at or just behind the broadhead and I have never seen that with Hickory.

Yeah I only shot POC for 3D shoots. Didn’t think I’d ever get into actually hunting with wood arrows but for some reason I wanna give it a shot.  About how much heavier can I expect a hickory shaft to be over a cedar shaft? 

Online Cory Mattson

  • Global Moderator
  • Trad Bowhunter
  • ****
  • Posts: 3765
Re: Hickory shafting
« Reply #3 on: January 03, 2021, 10:29:26 PM »
Not sure the technical differences in density / weight - others may be more familiar. I always went straight to heavy weights not really thinking compared to Cedar. I shot arrows 700 grains to 800 grains with a 140 gr Journeyman at the time - out of 65# to 70# bows
Another very good heavy shaft is Maple and they are Straight!!
If that helps.
<><
<--------------------<<<<<<
Savannah River Bow Zone - Trad only Bowhunting Clubs and Camps

Offline The Vanilla Gorilla

  • Trad Bowhunter
  • **
  • Posts: 906
Re: Hickory shafting
« Reply #4 on: January 03, 2021, 10:32:12 PM »

Another very good heavy shaft is Maple and they are Straight!!
If that helps.
<><
<--------------------<<<<<<

Thanks man. It definitely helps and I’ll look into maple as well. I did also dabble with ash, and it had heft, and also once I got it straight it stayed straight.

Online M60gunner

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 3025
Re: Hickory shafting
« Reply #5 on: January 03, 2021, 11:22:22 PM »
Hickory is hard, heavy, and difficult to straighten compared to Cedar. I made a doz for a friend back in the early 2000’s for his African trip. Used my heat gun to get them straight. Can’t say how they shot, the native boat handler chickened out because the Crock my friend wanted to shot wasn’t alone.

Offline mj seratt

  • Trad Bowhunter
  • **
  • Posts: 455
Re: Hickory shafting
« Reply #6 on: January 04, 2021, 01:40:44 AM »
I've had ash shafts in the past, and really liked them.  Now I have a dozen hickories that weigh 850 grains with 190 grain Grizzlies on them, and I absolutely love them.  I shoot them out of a 66 pound Bob Lee recurve, and the trajectory is fine for the distances I'll shoot.

Murray
Murray Seratt

Offline Wudstix

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6336
  • Wood arrows & D/R Longbows Rule!!!
Re: Hickory shafting
« Reply #7 on: January 04, 2021, 08:39:25 AM »
My 90-95# spine Hickory arrows 30" come in right under 700 grains before I add 190-200 grain VPA, Grizzly Instinct or Meathead.  I traded for mine so don't have a good source.  Maple is also good, as is Red Balau.  75# spine POC with Snuffer 160 came in at @735 grains.
 :coffee: :campfire: :archer2:
"If you're not living on the edge, you're taking up too much space!!!" - Me

Psalms 121: 1-3 - King David

60" Big River 67#@28"              
60" MOAB D/R LB 62#@27"
60" Big River D/R LB 65#@27"
62" Kota Badlands LB 72#@28"
62" Howatt TD 62#@28
58” Bear Grizzly 70#@28”
62" Big River D/R LB 60#@30"
66" Moosejaw Razorback LB 60#@28"

"Memento Mori"
PBS - Associate Member
Retired DoD Civ 1985-2019

Online Mike Bolin

  • Trad Bowhunter
  • **
  • Posts: 1876
Re: Hickory shafting
« Reply #8 on: January 04, 2021, 11:53:57 AM »
Pine Hollow Longbows carries the Hickory shafts in 5/16" in several spine weights. Thinking about building a dozen myself.
Centaur longbow 62", 43#@28"
River Raisin Siren, 60", 41#@28"
Osage Selfbow 62", 47#@28
Compton Traditional Bowhunters

Online KentuckyWolf

  • Trad Bowhunter
  • **
  • Posts: 453
Re: Hickory shafting
« Reply #9 on: January 04, 2021, 01:20:44 PM »
Allegheny Mountain Woods...was a source of them years ago...believe they closed down some time back. It’s been a long time since I shot hickory...but loved them. Pine Hollow is only source I know of now. Got to admit...all the take of them makes me want to get back to shooting wood arrows (specifically hickory)
Black Widow PSA III 54@28
Black Widow PLX 54@28

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©