3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: Higher strand string ??  (Read 1160 times)

Offline acollins

  • Trad Bowhunter
  • **
  • Posts: 382
Higher strand string ??
« on: November 25, 2020, 02:14:58 PM »
I just picked up a Bodnick Slick Stick. It has the original whisper string on it. It is extremely small I believe 10 strands. I have Beman Centershot arrows and the nocks just fall off the string. If I went to a larger string say 12, 14, or even 16 strand what differences would I see in a larger strand string as far as nock fit and performance

Online McDave

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6086
Re: Higher strand string ??
« Reply #1 on: November 25, 2020, 02:28:45 PM »
I think you would be better off re-serving it, either with thicker serving or two layers of serving.  You kind of have to experiment with .019, .021, .024, etc to see what works best.  Personally, I would rather use two layers of thin serving than one layer of .030, but that might just be me.  If you use two layers of different diameter serving, put the thinner layer on the bottom.

However, if your nocks are REALLY loose, you might be able to put a layer of thin serving on top of what is already there.  It's not really the best way to do it, as the thin serving might sink into the thicker serving below, but it might work, and would save you the trouble of removing the original serving.
TGMM Family of the Bow

Technology....the knack of arranging the world so that we don't have to experience it.

Offline GCook

  • Trad Bowhunter
  • **
  • Posts: 2041
Re: Higher strand string ??
« Reply #2 on: November 25, 2020, 02:40:39 PM »
I run 12 strand strings and they work great for the center shot an BE vintage nocks.
I can afford to shoot most any bow I like.  And I like Primal Tech bows.

Offline Ken Babicky

  • Trad Bowhunter
  • **
  • Posts: 126
Re: Higher strand string ??
« Reply #3 on: November 25, 2020, 04:01:04 PM »
Try a few wraps of dental floss just around the nock area on the serving. Rod Jenkins suggested it and I've tried it. Works well.

Online the rifleman

  • Trad Bowhunter
  • **
  • Posts: 1011
Re: Higher strand string ??
« Reply #4 on: November 25, 2020, 07:32:35 PM »
McDave x2 --- learning to serve is a good thing and you'll always be able to get good nock fit.  I also have used dental floss in a pinch--- it works just fine.

Offline Steelhead

  • Trad Bowhunter
  • **
  • Posts: 2546
Re: Higher strand string ??
« Reply #5 on: November 26, 2020, 11:19:50 PM »
You could just serve the nock area.Does not require much skill.I use nylon thread or braided fishing line in lower poundage like 10- 15# test and the dental floss mentioned above is used by guys as well.I use a little super glue to hold the threads together and a lighter to singe any thead sticking out

Offline chase perry

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 367
Re: Higher strand string ??
« Reply #6 on: November 29, 2020, 07:48:00 PM »
All good advice here.  I make my own strings with 10 strands, and have no creep after break in.  Serve .019 under the bow square, then finish with .024 for a very nice nock fit.  Nock fit is something I'm picky about too!  The dental floss suggestion is also going to work, just don't over tighten your knot, as you don't want the floss to cut through the serving. 

Best regards, Chase
Proverbs 28:1 "...the godly are as bold as lions."
Isaiah 40:31

BARK, n. The song of the dog. -Ambrose Bierce

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©