3Rivers Archery



The Trad Gang Digital Market












Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


« previous next »
Pages: [1]   Go Down

Author Topic: True Angle files  (Read 1040 times)

Online buckeyebowhunter

  • Trad Bowhunter
  • **
  • Posts: 1306
True Angle files
« on: January 31, 2021, 09:54:53 AM »
I had a true angle file set years ago. Made it super easy to sharpen two blade heads. After moving a couple times I have no idea where it went and I don't believe they're sold anymore. For some reason I remember seeing someone build their own either here or another forum and I was wondering if anyone knew where I could find some plans to build one. I have a fully outfitted woodshop where I work so I wouldn't think it'd be real difficult to build a set.
Logged

Online Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15009
Re: True Angle files
« Reply #1 on: January 31, 2021, 03:48:05 PM »
I bought one back in the day but never had luck with it. I took the files off and used them independently. If I still have the wood block you are welcomed to it. I don't remember the angle the file mounts were made.
Logged
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Offline 2wfstlhunting

  • Trad Bowhunter
  • **
  • Posts: 291
Re: True Angle files
« Reply #2 on: January 31, 2021, 05:37:15 PM »
I agree.  I have one and use it every year.  It is a great piece of equipment
Logged
Leon Stewart Deflex/Reflex Mahogany and bamboo 62" 53#@27.5"
Leon Stewart Deflex/Reflex curly maple, birdseye maple and Osage riser 53#@ 28"
Blacktail 62" longbow takedown 53#/57# B & W ebony
Harvey Crowned Eagle longbow  62"  49#

Offline BAK

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 1774
Re: True Angle files
« Reply #3 on: January 31, 2021, 06:16:02 PM »
Well, if you have any woodworking skills at all it would be pretty simple to take a small block of 2x4 and run it over the table saw at whatever angle you like your broad heads set at, likely somewhere around 20 degrees.  Easy Peasy   :thumbsup:
Logged
"May your blood trails be short and your drags all down hill."

Online buckeyebowhunter

  • Trad Bowhunter
  • **
  • Posts: 1306
Re: True Angle files
« Reply #4 on: January 31, 2021, 08:01:39 PM »
Pat, that would be great.  :thumbsup:
Logged

Online Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15009
Re: True Angle files
« Reply #5 on: January 31, 2021, 10:29:25 PM »
It's been a few years so I'll have to see if I can find it.
Logged
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Online Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15009
Re: True Angle files
« Reply #6 on: February 01, 2021, 10:46:39 PM »
Is this what you are looking for?


Logged
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Offline Orion

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 8252
  • Contributing Member
Re: True Angle files
« Reply #7 on: February 02, 2021, 10:00:36 AM »
That's definitely a tru-angle file set up.   :thumbsup:
Logged
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©