Author Topic: Rasp  (Read 1529 times)

Offline Mad Max

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6565
Rasp
« on: December 22, 2020, 07:15:07 PM »
4 in 1 rasp
I've been buying these 4 at a time for many years online at the zon.
They have fine flat and oval on one end, and coarse flat and oval on the other end, I would tape up the coarse end to grip on
The last time I clicked on ORDER AGAIN they were fine coarse on each end
Century Drill & Tool 4060 4-in-1 Half Round Hand File, 8"

I can't seem to find the correct (medium ?)coarseness I want.
What do you guy's use for GLASS bows?
I would rather fail at something above my means, than to succeed at something  beneath my means  
}}}}===============>>

Offline Flem

  • Trad Bowhunter
  • **
  • Posts: 2985
  • "Don't quote me on that!"
Re: Rasp
« Reply #1 on: December 22, 2020, 09:20:58 PM »
I've never used a combo rasp, so I don't know if this would be similar. But these second cut cro-moly files work good on glass and last a long time.  I don't trust myself with anything more aggressive :scared:

Offline Longcruise

  • Trad Bowhunter
  • **
  • Posts: 1335
Re: Rasp
« Reply #2 on: December 22, 2020, 11:05:31 PM »
I attack with a farriers rasp.  Gotta be careful though!

All of my files are catastrophes.   Chisels likewise.  I'm a serial tool abuser.  There's wanted posters on me in all the Ace Hardware stores.
"Every man is the creature of the age in which he lives;  very few are able to raise themselves above the ideas of the time"     Voltaire

Offline Flem

  • Trad Bowhunter
  • **
  • Posts: 2985
  • "Don't quote me on that!"
Re: Rasp
« Reply #3 on: December 22, 2020, 11:28:53 PM »
I attack with a farriers rasp.  Gotta be careful though!

All of my files are catastrophes.   Chisels likewise.  I'm a serial tool abuser.  There's wanted posters on me in all the Ace Hardware stores.

Whoa, farriers rasp on glass :scared: Your a thrill seeker!

Offline Bowjunkie

  • Trad Bowhunter
  • **
  • Posts: 2324
Re: Rasp
« Reply #4 on: December 23, 2020, 06:06:30 AM »
I've used a farriers rasp on glass bows lots of times... the smooth side. The Nicholson #49 and #50 too. Yeah, you kind of have to be aware of what they're capable of and how to use them to minimize risk, but they work good. Once they get worn enough, I dedicate them to use on glass, and don't use them on wood bows again.

Online Roy from Pa

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 20675
Re: Rasp
« Reply #5 on: December 23, 2020, 06:28:21 AM »
All I use are farrier rasps.

Can't remember ever using them on gwass bows:)

Offline Mad Max

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6565
Re: Rasp
« Reply #6 on: December 23, 2020, 08:25:58 AM »
I use the 49 and 50 then the 4 way fine end only after that.
I don't need a 4 in one because I only used the fine end :)

I would rather fail at something above my means, than to succeed at something  beneath my means  
}}}}===============>>

Offline Bowjunkie

  • Trad Bowhunter
  • **
  • Posts: 2324
Re: Rasp
« Reply #7 on: December 23, 2020, 10:05:01 AM »
I got one of those 4 in 1 rasps back early in my bow making, I pitched that thing after one use. That is not the tool for me.

Offline Flem

  • Trad Bowhunter
  • **
  • Posts: 2985
  • "Don't quote me on that!"
Re: Rasp
« Reply #8 on: December 23, 2020, 10:43:06 AM »
You guys must go thru a lot of rasps, using ones for wood and soft materials on glass :saywhat:

Offline Longcruise

  • Trad Bowhunter
  • **
  • Posts: 1335
Re: Rasp
« Reply #9 on: December 23, 2020, 12:05:29 PM »
I use the farriers rasp on the riser.  I can rough out a sight window on an ASL in about 2 minutes  (I know,  not really a sight window).  I don't use it on the limbs at all.

Thing about the farriers is that the cuts are so rough you need to be be sure to leave a little meat for a finer rasp or some rough paper.
"Every man is the creature of the age in which he lives;  very few are able to raise themselves above the ideas of the time"     Voltaire

Online kennym

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 17331
Re: Rasp
« Reply #10 on: December 23, 2020, 12:31:28 PM »
On another note, my files for nocks seem to dull quickly, I read you could sharpen them with vinegar . I tried it but left them in for a week instead of the few hours (kinda forgot). Man did that work!!  Took them out, rinsed with water , dried and shot em with wd 40 to keep from further rusting.  Seemed to stay sharp longer than new ones too...
Stay sharp, Kenny.

   https://www.kennysarchery.com/

Offline Flem

  • Trad Bowhunter
  • **
  • Posts: 2985
  • "Don't quote me on that!"
Re: Rasp
« Reply #11 on: December 23, 2020, 01:24:09 PM »
That vinegar soak does work good. But only on oxidation, won't do anything for a file thats been dulled by hard usage.

Offline Longcruise

  • Trad Bowhunter
  • **
  • Posts: 1335
Re: Rasp
« Reply #12 on: December 23, 2020, 01:37:47 PM »
I've done that with some files and it did improve them.

There's an outfit that sharpens files.  Roy knows the name.
"Every man is the creature of the age in which he lives;  very few are able to raise themselves above the ideas of the time"     Voltaire

Offline Mad Max

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6565
Re: Rasp
« Reply #13 on: December 23, 2020, 04:47:11 PM »
Whats   da name ROY :bigsmyl:
I would rather fail at something above my means, than to succeed at something  beneath my means  
}}}}===============>>

Online Roy from Pa

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 20675
Re: Rasp
« Reply #14 on: December 23, 2020, 04:55:45 PM »

Offline Mad Max

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6565
Re: Rasp
« Reply #15 on: December 23, 2020, 06:38:29 PM »
 :thumbsup:
I would rather fail at something above my means, than to succeed at something  beneath my means  
}}}}===============>>

Offline Tim Finley

  • Trad Bowhunter
  • **
  • Posts: 1030
Re: Rasp
« Reply #16 on: December 23, 2020, 07:24:03 PM »
I go over my files with the rubber erasers that are used to clean up sanding belts and drums .

Offline Mad Max

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6565
Re: Rasp
« Reply #17 on: December 23, 2020, 08:32:49 PM »
I have a file Brush or a wire brush works good too.
I would rather fail at something above my means, than to succeed at something  beneath my means  
}}}}===============>>

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©