3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: ? CARBONWOOD EXPERTS  (Read 864 times)

Offline Robert Honaker

  • Trad Bowhunter
  • **
  • Posts: 750
? CARBONWOOD EXPERTS
« on: February 14, 2007, 06:33:00 PM »
I'm gettin low on shafts for my 55lb Super Kodiak,wanna try carbons.Shawn Leonardo told me that carbonwood 3000's would work for a bow I have on order that's 52lb@29in,my true draw.I draw the SK TO 55@ 28IN because it stacks like crazy,do ya think 3000's will work for both as long as I tune to each?

Offline bowmac

  • Trad Bowhunter
  • **
  • Posts: 255
Re: ? CARBONWOOD EXPERTS
« Reply #1 on: February 14, 2007, 06:43:00 PM »
I used 3000's in my #52 BW, and use 3000's in my #53 & #56 Zippers. I have also used them in my #51 Vortex LB. Other than woodies they are my favorite for that kind of poundage. Had very little trouble tuning. I needed no extra weights up front other than a 125 gr. or 145 gr. point. Using 3 5" parabolics. I also used 5575 GT's. There allright but I would trade them for more 3000's.
Wool the Natural Fiber

Offline Charlie Lamb

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 8237
Re: ? CARBONWOOD EXPERTS
« Reply #2 on: February 14, 2007, 09:07:00 PM »
Bob... you should be good to go with the 3000!!
Hunt Sharp

Charlie

Offline Robert Honaker

  • Trad Bowhunter
  • **
  • Posts: 750
Re: ? CARBONWOOD EXPERTS
« Reply #3 on: February 14, 2007, 10:02:00 PM »
Where can I get 3000's?Kustom King doesn't have'em and everywhere else is out of stock until Goldtip opens a factory in Mexico.  :banghead:

Offline jcsnapshot

  • Trad Bowhunter
  • **
  • Posts: 92
Re: ? CARBONWOOD EXPERTS
« Reply #4 on: February 14, 2007, 10:08:00 PM »
That is gonna be a problem  :(  I have been waiting for some 3000's for about a year.

Offline Shawn Leonard

  • Trad Bowhunter
  • **
  • Posts: 7837
Re: ? CARBONWOOD EXPERTS
« Reply #5 on: February 14, 2007, 10:32:00 PM »
Pm sent! I should also say that for them to bareshaft properly you will need to add weight, they spine over 72#s. Shawn
Shawn

Offline Robert Honaker

  • Trad Bowhunter
  • **
  • Posts: 750
Re: ? CARBONWOOD EXPERTS
« Reply #6 on: February 14, 2007, 10:55:00 PM »
Yes, I want to try and shoot a magnus 125 with a 100-125gr insert.I had some 4000's before and never did get enough op front,even with brass insert and steel adapters.

Offline Cutty47

  • Trad Bowhunter
  • **
  • Posts: 274
Re: ? CARBONWOOD EXPERTS
« Reply #7 on: February 14, 2007, 11:59:00 PM »
Jeez, Shawn...the 3000's spine out at #72?  I've been shooting 4000's cut to "30 with 200 grns up front out of my #67 Robertson...not perfect, but not bad...

I'm a big fan of the shafts, by the way, great finish...realtively durable...consistent...good value...in my book way more consistent than the GT 55/75's Trads I also shoot with 225 up front...

Offline Guru

  • Trad Bowhunter
  • **
  • Posts: 11447
Re: ? CARBONWOOD EXPERTS
« Reply #8 on: February 15, 2007, 05:33:00 AM »
Cutty, The 4000's spine out about 85#,but I've had a few as low as 78# and as high as 95#!!!  But the vast majority 85#....I find that with all carbon shafts,if you want to be picky,you have to get a spine tester on them....a lot on inconsistancy's...but once you get a bunch matched up...good stuff!!
Curt } >>--->   

"I love you Daddy".......My son Cade while stump shooting  3/19/06

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©