3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: Predator lobo elite brace hight  (Read 929 times)

Offline UncasUK

  • Trad Bowhunter
  • **
  • Posts: 72
Predator lobo elite brace hight
« on: August 25, 2021, 06:45:09 AM »
As above, can anyone help please.
I have a 62'' hybrid lobo elite, bought new but missing
instructions/leaflet etc.
Also if you have one what is your thoughts on the bow
regarding shooting & quality.
Regards to all from an English Trad-bow fan.

Online The Whittler

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 2868
Re: Predator lobo elite brace hight
« Reply #1 on: August 25, 2021, 09:40:50 AM »
With a hybrid I would start at around 7" and tune from there, give or take.

Offline UncasUK

  • Trad Bowhunter
  • **
  • Posts: 72
Re: Predator lobo elite brace hight
« Reply #2 on: September 21, 2021, 06:45:18 PM »
The Length to the back of the string groovs is 62.5'' on my Lobo Elite, total tip to tip is 64''
I thought a string length of 59'' would be ok and give me a brace hight of 7.5''
It's giving 7'' so I will try and see if it will twist up and shorten.
Anyone have any better ideas.

Offline Orion

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 8261
  • Contributing Member
Re: Predator lobo elite brace hight
« Reply #3 on: September 21, 2021, 08:50:50 PM »
How does it shoot at 7?  May not need to go any higher than that. Perhaps even lower.  I shot most of my mild and extreme r/d 64-inch longbows at a brace of 6 3/4.

Offline UncasUK

  • Trad Bowhunter
  • **
  • Posts: 72
Re: Predator lobo elite brace hight
« Reply #4 on: September 22, 2021, 07:18:03 AM »
Hello Orion,

The bow came with a 58'' string from Hunters nich, for a brace height of 7.75''
which I thought was a bit to much, so had another F/T sring made at 59''
and that gives me a brace hight of 7'' it seems so far to be shooting well at that height.
But further testing is necessary, so thank you for your opinion.

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©