Author Topic: Ya all wanna see a BBO build?  (Read 11269 times)

Offline goobersan

  • Trad Bowhunter
  • **
  • Posts: 1386
Re: Ya all wanna see a BBO build?
« Reply #120 on: January 19, 2023, 09:17:33 PM »
Is that your full draw pic, Roy?   :laughing:
Thought this should be posted again  :wavey:

Online Roy from Pa

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 20685
Re: Ya all wanna see a BBO build?
« Reply #121 on: January 20, 2023, 06:42:05 AM »
Nuff outta you goober-boy:)

Online Mad Max

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6565
Re: Ya all wanna see a BBO build?
« Reply #122 on: January 20, 2023, 08:29:56 AM »
Roy

I can't remember, is you riser able to pivot? that spring clamp isn't much to hold it to the tiller tree.
When you shoot (or the way your tiller tree set up) is your whole palm pushing the bow or just the crotch of your thumb and index finger?
Doing the math and holding the bow with a arrow on the shelf (split finger), my middle finger is just under a 1/2" under the shelf (my pull hook is 1/2" under the shelf) and make the hook not drift left or right.
I would rather fail at something above my means, than to succeed at something  beneath my means  
}}}}===============>>

Online Roy from Pa

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 20685
Re: Ya all wanna see a BBO build?
« Reply #123 on: January 20, 2023, 08:55:49 AM »
The bow doesn't pivot because the limb timing balance are timed right from the very first pull on the tree. If it wasn't balanced the bow would pivot on the cradle even when clamped down. I only need to pull the tree rope a couple inches and I can see which limb is stronger and I address that "right away" till the rope tracks the line. I can leave the clamp off and the bow doesn't pivot. I just clamp it incase I would bump the bow and knock it off the cradle.
Another thing you need to consider is when your bow is done and you are shooting, the nocking point on the string is usually 1/2" + or - a tad to get good arrow flight. I shoot 3 fingers under and my nocking point is usually 5/8th above the shelf on all my bows, even glass recurves. So I set the tree up taking the 5/8th higher nocking point on the string into consideration. And I place the nocking point at 5/8th high when the bow is all done.. When I shoot my BBO bows my palm is pretty much flat on the grip with a tad more pressure at the shelf. When I shoot my recurves and they have more of a pistol grip, I hold the bow with my thumb and fore finger and let my other finger's hang free and the pull weight of the bow is all in the web between my thumb and fore finger. I have a wrist strap on my recurve and I just let the bow pivot forward after I shoot.

Offline Buggs

  • Trad Bowhunter
  • **
  • Posts: 618
  • Beware the simian swine jockey
Re: Ya all wanna see a BBO build?
« Reply #124 on: January 20, 2023, 09:39:30 AM »
Hang free! Thats going to be my new mantra.
 I've seen that style of grip before......
Ooo, who, who hangs free

Online wood carver 2

  • Trad Bowhunter
  • **
  • Posts: 2725
Re: Ya all wanna see a BBO build?
« Reply #125 on: January 20, 2023, 11:32:54 AM »
Hang free! Thats going to be my new mantra.
 I've seen that style of grip before......

I see that you are a man of culture and proper upbringing… 😉
Dave.
" Vegetarian" another word for bad hunter.

Online Mad Max

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6565
Re: Ya all wanna see a BBO build?
« Reply #126 on: January 20, 2023, 02:55:47 PM »
Thanks Roy :thumbsup:
I would rather fail at something above my means, than to succeed at something  beneath my means  
}}}}===============>>

Offline Carpdaddy

  • Trad Bowhunter
  • **
  • Posts: 806
Re: Ya all wanna see a BBO build?
« Reply #127 on: January 21, 2023, 08:46:44 AM »
Good stuff Roy, thanks for sharing!  :notworthy:
Stumpshooting; Slinging sticks with sticks toward the origin of the sticks.

Offline Roughcountry

  • Trad Bowhunter
  • **
  • Posts: 1112
Re: Ya all wanna see a BBO build?
« Reply #128 on: January 22, 2023, 03:44:22 PM »
Thanks Roy. I've been watchin. Realy nice job.

Online Roy from Pa

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 20685
Re: Ya all wanna see a BBO build?
« Reply #129 on: January 22, 2023, 07:28:13 PM »
Thanks Robin.

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©