Author Topic: scratches and dings on clear glass  (Read 2354 times)

Offline adkmountainken

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 4994
scratches and dings on clear glass
« on: February 20, 2024, 02:28:26 PM »
recently picked up a beautiful bow only draw backs being some scratches and dings in the clear glass finish. what can i do to clean them up? built in 2006 dings are on sides of limb 3 places
« Last Edit: February 20, 2024, 06:46:42 PM by adkmountainken »
I go by many names but Daddy is my favorite!
listen to everyone,FOLLOW NO ONE!!
if your lucky enough to spend time in the mountains...then your lucky enough!
What ever befalls the Earth befalls the sons of the Earth.

Online Crooked Stic

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6075
Re: scratches and dings on clear glass
« Reply #1 on: February 20, 2024, 05:34:20 PM »
Got any pics?
High on Archery.

Online Mad Max

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6565
Re: scratches and dings on clear glass
« Reply #2 on: February 20, 2024, 05:41:39 PM »
Is the bow 10, 20, 40 years old?
More info please
I would rather fail at something above my means, than to succeed at something  beneath my means  
}}}}===============>>

Online Kirkll

  • SPONSOR
  • Trad Bowhunter
  • *****
  • Posts: 2416
Re: scratches and dings on clear glass
« Reply #3 on: February 20, 2024, 09:17:14 PM »
Those edge dings on the glass will sand out pretty easily with 180-220 grit sand paper. but....if you have actual dents in the edge of the wood,  that can be a little tricky to do without throwing your limbs out of tiller.

I've taken dents out of furniture before by sanding the finish off and using a wet rag and a hot iron to raise the grain, then sanding it flush again.... I've never tried that on the edge of a limb before.     .02 cents worth.   

Kirk
Big Foot Bows
Traditional Archery
[email protected]
http://bigfootbows.com/b/bows/


Online Crooked Stic

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6075
Re: scratches and dings on clear glass
« Reply #5 on: February 21, 2024, 08:56:36 AM »
If you got little dents in the wood can be filled with thick CA glue then sanded level.if those white spots can be steel wooled or sanded out and if they don't get to deep smear some CA over them and steel wool . 0000
High on Archery.

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©