Preferred carbon arrow

[cacciatore]

What’s your preferred carbon arrow? I used a lot Carbon Express Eritage but once they discontinued them I am mostly using Easton FMJ 5mm for my 400 spine and Fred Eichler Legacy for the 500.

[Wheels2]

I generally shoot GoldTip.  But I had to go to a different spine and had always like Easton Aftermath shafts.  I ended up picking up two dozen on the big auction site.  They were discontinued by Easton some time ago.

[streamguy]

I've shifted entirely to Big Jim's Dark Timber shafts for my carbon shafts (I shoot wood too) and for shafts I make for my kids and to keep around for visitors to shoot.  They're durable, Big Jim's service is great, and I can't shoot the difference between +/- .006 and +/- .002 straightness. 

[MnFn]

I really like the Easton Axis traditional 500 but don’t know if they still make them.Have you looked at SafariTuff Taipan. I have heard good things about them, but no experience with the personally.

[David McLendon]

I shot Carbon Express Heritage as well and still have quite a few, but I have pretty much swapped over to Big Jim's Dark Timbers and have been very satisfied with them.

[Mike Bolin]

I shot Easton 6.5  bowhunter shafts for a long time. A drop in bow weight needed a 600 spine shaft that was not available in the 6.5. Picked up a dozen Dark Timbers at Cloverdale and couldn’t be more pleased! The first 6 I made up all finished within 3 grains. Can’t get much closer than that. Durable, precise, look good and a great price!👍🏻🏹

[Longtoke]

I like Victory Vforce and I really liked beman Centershots.  I have heard nothing but praise for the Big Jim Dark timbers,  I plan to try some when I run out of victory arrows.

[MnFn]

Felix,
I took out my Tall Tines bow and shot with a variety of arrows. It is 52#. It really likes the black Easton FMJ 400.

Also took out my Liberty Edge (44#)and my St Patrick Lake Mushin Styx. (48#) Both really like my Easton Axis Traditionals 500.

In all cases, I experimented with different head weight, to good results.

[frassettor]

What’s your preferred carbon arrow? I used a lot Carbon Express Eritage but once they discontinued them I am mostly using Easton FMJ 5mm for my 400 spine and Fred Eichler Legacy for the 500.

I’m still using the CX Heritage . What size were you shooting?

[evgb127]

I primarily shoot wood, but I’ve dabbled with just about every carbon out there. When I want to shoot carbon, I always go back to Gold Tip Trad Classics with the ballistic collar system.  The can be pricey, but they are hard to beat.

[cacciatore]

What’s your preferred carbon arrow? I used a lot Carbon Express Eritage but once they discontinued them I am mostly using Easton FMJ 5mm for my 400 spine and Fred Eichler Legacy for the 500.

I used both the 350 and the 250 from different bows.
I’m still using the CX Heritage . What size were you shooting?

[WVbowhunter]

For the last year and a half or so I've been running Skylon Archery Quantics (similar diameter to the Easton Axis but cheaper) and so far I've got no major complaints.

[frassettor]

What’s your preferred carbon arrow? I used a lot Carbon Express Eritage but once they discontinued them I am mostly using Easton FMJ 5mm for my 400 spine and Fred Eichler Legacy for the 500.

I used both the 350 and the 250 from different bows.
I’m still using the CX Heritage . What size were you shooting?

Those are great shafts. I’m shooting the 350’s.

[Trenton G.]

I've always shot GoldTip Traditionals and been happy with them. I tried the Classics once but didn't like them as much.

[Mike Walker]

Easton 5MM Axis

[LookMomNoSights]

Easton Carbon Legacy 

[Steve D]

 Dark Timbers