Author Topic: Spine Tester (Read 869 times)

fflintlock · « **on:** February 25, 2007, 11:17:00 AM »

Does anyone have a recipe for a homemade spine tester ?
And, do they actually work as good, or pretty close to a store bought tester ?
Thanks,
Jerald

Bowmania · « **Reply #1 on:** February 25, 2007, 11:27:00 AM »

This site or the LW had pictures and discussion on one. Looked like a great and simple idea.

Bowmania

waterone · « **Reply #2 on:** February 25, 2007, 11:32:00 AM »

Do a search on this site for a lot of info, but check out this thread:

topic, easy spine tester

waterone

painthorse · « **Reply #3 on:** February 25, 2007, 12:52:00 PM »

http://www.jamesmhill.com/Spine_Tester.html
I have built two of these.Easy to build and as good as store bought.

Lefty · « **Reply #4 on:** February 25, 2007, 07:06:00 PM »

I agree with painthorse. Jim Hill's plans are easy to follow and make a very accurate spine tester.

poekoelan · « **Reply #5 on:** February 25, 2007, 10:31:00 PM »

I prefer the protractor type, but the dial indicator is a good one too. If you decide to go the dial route, make sure it has at least an inch of travel and check the resistance on the plunger, you may or may not have to compensate for it somehow. I know some have done that ( compensated for the spring pressure ) but I can't quite remember what they did.

News:

Author Topic: Spine Tester (Read 869 times)

fflintlock

Spine Tester

Bowmania

Re: Spine Tester

waterone

Re: Spine Tester

painthorse

Re: Spine Tester

Lefty

Re: Spine Tester

poekoelan

Re: Spine Tester

Users currently browsing this topic:


LEFT HAND BOWS CLASSIFIEDS	TRAD GANG CLASSIFIEDS ACCESS	RIGHT HAND BOWS CLASSIFIEDS