Author Topic: HeLp My BoB LeE iS LLOOUUDD!! UPDATED* (Read 670 times)

Stone Knife · « **Reply #20 on:** November 01, 2008, 07:31:00 PM »

Bob Lee recommends you dip the ends of the string in lacquer thinner to remove the wax and quiet things down, I know that I need to brace my Lee recurve a lot higher than they suggest and it likes a heavy arrow to get it to quiet down, it is real critical on brace height when it comes to noise.

redfish · « **Reply #21 on:** November 01, 2008, 08:08:00 PM »

I use a B50 string with wool at the ends (yes, even on a longbow) and wool silencers, 8" brace. Very quiet. The wool on the ends made a big difference.

Matty · « **Reply #22 on:** November 02, 2008, 10:49:00 PM »

The rubber gaskets are already there in place. I get to shoot it again tomorrow so I will give some of these things a try. Thanks for everyones help I'll keep yall updated

Matty · « **Reply #23 on:** November 04, 2008, 07:50:00 PM »

OK RAISED THE BRACE UP TO 8 1/2" AND IT SHUT THE BOW BIG TIME. I ALSO PUT LIMBSAVERS ON IT BEFORE I RAISED THE BRACE HEIGHT I'M SURE THEY HELP! AND IT DOESNT HURT TO KEEP THEM THERE SO I'LL WORRY WHEN THEY FALL OFF. THANKS FOR ALL THE INPUT.

lilbobby · « **Reply #24 on:** November 04, 2008, 08:11:00 PM »

Matty, have a B.L. Sig. L/B also and there is only one time it got noisy, limbs were loose. I had not checked them in a long time, run about 8" on B.H. with pair of W.W. (Quiet): My brother also has the same with string leaches and it is quiet, we both use B50. Just a thought!

Matty · « **Reply #25 on:** November 04, 2008, 09:09:00 PM »

Thanks bob I think getting that brace ht up really helped..

News: