3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: Flint KNappers, NEED HELP!  (Read 196 times)

Offline jcarter

  • Trad Bowhunter
  • **
  • Posts: 117
Flint KNappers, NEED HELP!
« on: November 09, 2008, 12:40:00 PM »
Just started up flint knapping and need some direction. Do you find your own stone, buy it or what?  

I live in southeast MO and have access to dozens of creeeks that are full of stone. What is best?  

Also, does anybody know of any good places to purchase obsidian for knapping?

Thanks
Black Widow PCH 47@28 in
Black Widow PLX 59#@28 in

Offline knife river

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 961
Re: Flint KNappers, NEED HELP!
« Reply #1 on: November 09, 2008, 05:05:00 PM »
"Do you find your own stone, buy it or what?"

Yes!

"I live in southeast MO and have access to dozens of creeeks that are full of stone. What is best?"

Best for what?  Get some of that Burlington, Kaolin, Cobden, or whatever the knappable material is in your creek and start knapping.

"Also, does anybody know of any good places to purchase obsidian for knapping?"

 www.neolithics.com     Glass is cheaper -- maybe even free.  Enjoy yourself!
TGMM Family of the Bow

"Nothing in all the world is more dangerous than sincere ignorance and conscientious stupidity."
  Martin Luther King, Jr.

Offline Billy

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 1144
Re: Flint KNappers, NEED HELP!
« Reply #2 on: November 09, 2008, 08:15:00 PM »
Speaking of glass, what thickness and or is there a certain type that's better?
TGMM Family of the Bow

Taker of the Founders Red Pill

Offline LAR43

  • Trad Bowhunter
  • **
  • Posts: 620
Re: Flint KNappers, NEED HELP!
« Reply #3 on: November 09, 2008, 08:53:00 PM »
Go to a glass shop & see if you can get some scrap 1/4 - 3/8 plate . .
Be careful & use all the safety stuff. Glasses, knee pad & most definitely a palm pad.
This eneadvor is going to take you a while. It's not as easy as it first appears.
Practice on the glass 'till you get the techniques down.
Have fun!

Larry
Age brings us the priceless gift of experience and knowledge. . . Priceless, but not free.

Offline Bill Skinner

  • Trad Bowhunter
  • **
  • Posts: 457
Re: Flint KNappers, NEED HELP!
« Reply #4 on: November 11, 2008, 02:27:00 PM »
A good source of thck glass is old TV screens.  It is close to 1/2 inch thick.  It has a slight curve but is thick enough that it can be "straitened out" as you knap.  It make one of the best glass points for hunting that I have used.  You can also use the back.  Be careful of the stuff inside the tube, don't breath it and wash it off before you work it.  Bill

Offline KILLER B

  • Trad Bowhunter
  • **
  • Posts: 296
Re: Flint KNappers, NEED HELP!
« Reply #5 on: November 11, 2008, 02:47:00 PM »
Use what you can get your hands on. Finding your own stone you will learn more about what to look for.  Practice practice practice.  Most importantly finding it costs nothing other than time to pick it up and maybe a little gas.
Sticks and stones break deer bones.
One final word -Ramalamashamjam-

Offline Dave Bowers

  • Trad Bowhunter
  • **
  • Posts: 1391
Re: Flint KNappers, NEED HELP!
« Reply #6 on: November 11, 2008, 07:04:00 PM »
also old toilets tanks

Offline razorsharptokill

  • Trad Bowhunter
  • **
  • Posts: 3255
Re: Flint KNappers, NEED HELP!
« Reply #7 on: November 12, 2008, 02:36:00 AM »
I've heard that TV screens contain lead so be careful. I'm using glass to learn on and have also ordered some preforms from neolithics. Craig Razat(runs neolithics) is a highly acclaimed knapper. There are tons of vids on youtube. Watch them and try to get some one on one with an experienced knapper(which I am not). find a knapp in. Galss can be obtained from glass shops. They will probably give you their scraps. The right tools really help too. I like the ishi stick as it makes it easier on my wrists.

Here's a link to my recent post.  http://tradgang.com/noncgi/ultimatebb.php?ubb=get_topic;f=1;t=066721;p=2#000018
It is a head I did from 1/4" plate glass using an ishi stick and a smaller pressure flaker. I've been at it for about two months. When I learned to drive my flakes half way across the piece I got a lot better.

If you can't find any glass. I have access to a lot. Let me know.
Jim Richards
Veteran

USMC 84-88
Oklahoma Army National Guard 88-89
USMCR 89-96 Desert Storm
Oklahoma Air National Guard 2002- present. Operation Iraqi Freedom 2005(Qatar) and 2007(Iraq),
Operation New Dawn Iraq 2011,
Operation Enduring Freedom 2018 Afghanistan.
NRA Life Member.

Offline Tracy Bellamy

  • Trad Bowhunter
  • **
  • Posts: 26
Re: Flint KNappers, NEED HELP!
« Reply #8 on: November 12, 2008, 03:21:00 AM »
I'm getting intrest in this as well, Good info guys and good thread..

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©