Author Topic: How to get factory insert out of a WW? (Read 259 times)

MikeW · « **on:** November 13, 2008, 10:18:00 AM »

Anyone done this? I'd like to take the factory insert out of some Woodsmen's I have. What are they in there with? Epoxy?
TIA

Smallwood · « **Reply #1 on:** November 13, 2008, 10:29:00 AM »

it's mounted with an industrial epoxy like jb weld, just heat and pull, heat and pull, till it breaks loose.

James Wrenn · « **Reply #2 on:** November 13, 2008, 10:35:00 AM »

They will come out with a little heat like said.

MikeW · « **Reply #3 on:** November 13, 2008, 10:43:00 AM »

Thx guys..I'll give it a try.

J-dog · « **Reply #4 on:** November 13, 2008, 10:52:00 AM »

you might try boiling them instead of a direct heat though I am not sure this will work with epoxy?

J

O.L. Adcock · « **Reply #5 on:** November 13, 2008, 11:15:00 AM »

Naw, the boiling doesn't get hot enough. Heat the insert only and have big pliers on the head to act as a heat sink. Got to be careful not to over heat the broadhead steel or you'll ruin it's temper and lose yours!

....O.L.

fredbear1969 · « **Reply #6 on:** November 13, 2008, 06:12:00 PM »

i heated some and the broadhead shot off and landed on my bow stringer needless to say it burnt my stringer intwain.but when ya heat them up have it pointed in a safe direction

News:

Author Topic: How to get factory insert out of a WW? (Read 259 times)

MikeW

How to get factory insert out of a WW?

Smallwood

Re: How to get factory insert out of a WW?

James Wrenn

Re: How to get factory insert out of a WW?

MikeW

Re: How to get factory insert out of a WW?

J-dog

Re: How to get factory insert out of a WW?

O.L. Adcock

Re: How to get factory insert out of a WW?

fredbear1969

Re: How to get factory insert out of a WW?

Users currently browsing this topic:


LEFT HAND BOWS CLASSIFIEDS	TRAD GANG CLASSIFIEDS ACCESS	RIGHT HAND BOWS CLASSIFIEDS