3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: Close  (Read 263 times)

Offline Ssamac

  • Trad Bowhunter
  • **
  • Posts: 971
Close
« on: November 13, 2008, 11:15:00 PM »
I've seen some ads for blunts, and as a frequent arrow loser, I'm interested. How can I use them?
Can I put them over a glued on field point on a wooden arrow? Can I screw them into a carbon or aluminum shaft?

Offline Peachey

  • Trad Bowhunter
  • **
  • Posts: 316
Re: Close
« Reply #1 on: November 14, 2008, 09:52:00 AM »
Ace hexhead blunts are very good. They make glue on and screw in, in a variety of weights. You would remove the field point first.

Offline JRY309

  • Trad Bowhunter
  • **
  • Posts: 4383
Re: Close
« Reply #2 on: November 14, 2008, 10:01:00 AM »
If you glue them on over a field point it will drive right through the rubber blunt on a hard hit.Unless you grind off the point if you are using glue-on points.They work good slipping over an insert or a wooden shaft cut off square.Or you can use screw on blunts.

Offline Ssamac

  • Trad Bowhunter
  • **
  • Posts: 971
Re: Close
« Reply #3 on: November 14, 2008, 12:56:00 PM »
Will they stick into a target bag or bounce off? Thanks
Sam

Offline Abram

  • Trad Bowhunter
  • **
  • Posts: 60
Re: Close
« Reply #4 on: November 14, 2008, 01:14:00 PM »
They will stick in a 3D target but keep in mind it will make a bigger hole than a field point and reduce the life of the target. I have enver shot them into bag targets so I am not sure if they will stick or not.

Offline TomMcDonald

  • Trad Bowhunter
  • **
  • Posts: 670
Re: Close
« Reply #5 on: November 14, 2008, 01:33:00 PM »


Rubber blunts over steel blunts.
190gr total.

Offline Frank V

  • Trad Bowhunter
  • **
  • Posts: 1183
Re: Close
« Reply #6 on: November 14, 2008, 01:42:00 PM »
Ssmac, they will penitrate a little ways into a bag target & probably kind of hang there at a angle hanging down. Thanks Frank
U.S.A. "Ride For The Brand Or Leave."

Offline Ssamac

  • Trad Bowhunter
  • **
  • Posts: 971
Re: Close
« Reply #7 on: November 14, 2008, 03:32:00 PM »
So these are more for stump shooting and even small game.

Tom, why put a rubber blunt over a steel blunt? Which are better to have?

thanks
sam

Offline sweet old bill

  • Trad Bowhunter
  • **
  • Posts: 505
Re: Close
« Reply #8 on: November 14, 2008, 04:13:00 PM »
I do the same, the rubber over the steel blunt just adds about another 75 grains to the total arrow weight. Gets it much closer to my normal BH weight...
you should see how I use to shoot
Sand dune archers Myrtle beach SC
Senior archers of Oneonta NY

Offline TomMcDonald

  • Trad Bowhunter
  • **
  • Posts: 670
Re: Close
« Reply #9 on: November 14, 2008, 04:58:00 PM »
Quote
Originally posted by Ssamac:
So these are more for stump shooting and even small game.

Tom, why put a rubber blunt over a steel blunt? Which are better to have?

thanks
sam
Sam.
I did it like said above to bring the weight of the tips up to my broadhead and target arrows weight.
Also, I think the rubber absorbs some of the shock and reduces damage to the shafts.

Offline Ssamac

  • Trad Bowhunter
  • **
  • Posts: 971
Re: Close
« Reply #10 on: November 14, 2008, 06:31:00 PM »
Gocha
Where do you get these?

Offline TomMcDonald

  • Trad Bowhunter
  • **
  • Posts: 670
Re: Close
« Reply #11 on: November 14, 2008, 06:33:00 PM »
I ordered the steel blunts from my local  www.tradbits.com.au  and bought the rubber ones from my local archery store  http://www.archeryshop.com.au/

But I'd say you can get them anywhere.

Offline Ssamac

  • Trad Bowhunter
  • **
  • Posts: 971
Re: Close
« Reply #12 on: November 16, 2008, 11:44:00 PM »
Tom  Austrailia is a bit far in shipping for the US. But I'm sure there's a local US place for this.

Thanks
sam

Offline TomMcDonald

  • Trad Bowhunter
  • **
  • Posts: 670
Re: Close
« Reply #13 on: November 17, 2008, 01:40:00 AM »
Quote
Originally posted by Ssamac:
Tom  Austrailia is a bit far in shipping for the US. But I'm sure there's a local US place for this.

Thanks
sam
You're right but our dollar is worth almost only half as much as yours so check it out.

Offline Bill Skinner

  • Trad Bowhunter
  • **
  • Posts: 457
Re: Close
« Reply #14 on: November 17, 2008, 12:18:00 PM »
If your bag target has taken a lot of hits and is starting to show wear, a blunt, depending on what type, can rip BIG holes where it hits.  I prefer the plastic soda bottles.  I have been known to chase one all over a cut hay field.  Bill

Offline Ssamac

  • Trad Bowhunter
  • **
  • Posts: 971
Re: Close
« Reply #15 on: November 17, 2008, 03:14:00 PM »
Like stump shooting. I did some plastic coffee cans yesterday with my son in addition to wild trashes. Hard to get the field point out. A blunt might be the answer

Thanks
sam

Offline Noelkman

  • Trad Bowhunter
  • **
  • Posts: 66
Re: Close
« Reply #16 on: November 17, 2008, 04:27:00 PM »
Bill has the right idea. My son and I have more fun together, shooting milk jugs and soda bottles with rubber blunts, than should be legally allowed. We start shooting from 20 yds and if you miss your next shot is from where your arrow comes to rest.

Offline Ssamac

  • Trad Bowhunter
  • **
  • Posts: 971
Re: Close
« Reply #17 on: November 18, 2008, 12:23:00 AM »
What if you miss by an inch? Do you just get on top of the stump and shoot?

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©