Author Topic: best way to cut carbons w/o arrow saw? (Read 955 times)

44charlie · « **Reply #20 on:** November 27, 2008, 01:40:00 PM »

i tape mine with masking tape and then cut with a fine hacksaw blade in a miter box. no fraying!

BOWMARKS · « **Reply #21 on:** November 27, 2008, 05:20:00 PM »

Mini cut off saw from Harbor Frieght will cut
alluminum , carbon and wood . Price about $25.00 can also get on #### with extra blades .

Shooty1 · « **Reply #22 on:** November 27, 2008, 07:03:00 PM »

Miter or chop saw with a composite blade.

blind one · « **Reply #23 on:** November 27, 2008, 07:59:00 PM »

Before I bought an arrow saw I used a dremmel, Then just made sure it was square with a squaring tool.

jrchambers · « **Reply #24 on:** November 27, 2008, 08:04:00 PM »

i use a little hand pull saw, I draw a line with a cresting jig and then cut it, or i just flile it square after the cut.

DVSHUNTER · « **Reply #25 on:** November 27, 2008, 10:05:00 PM »

I used a pipe cutter and just went REALLY... REALLY slow with light preasure ever time and it worked for me

News:


LEFT HAND BOWS CLASSIFIEDS	TRAD GANG CLASSIFIEDS ACCESS	RIGHT HAND BOWS CLASSIFIEDS