Chek-Mate TD Question

[Whitetail Chaser]

I am trying to figure out if Chek-Mate limbs will fit my Cascade bow.  I have evaluated my limbs, and I have come up with some measurements.

1) Unstrung the straight line distance from the limb tip to the base of the limb is 19.75 inches (see pic).

2) The center holes for the bolt and the alignment pin are 1.25 and 3.25 inches from the limb butt, respectively.

Can someone check out their Hunter I and Hunter II limbs to see if these are the same measurements?  Thanks, Brett

 

[reecool]

Hello Brett ,
Those measurements are for a Hunter II 58" #57@28 .
1) Unstrung the straight line distance from the limb tip to the base of the limb is 22 1/2 inches
2) The center holes for the bolt and the alignment pin are 2 1/16 or 2 1/8 " and 3 1/4 inches alignement pin to limb butt . Center hole bolt to limb butt 1 1/4 ".
Hope that can help you , by the way the Firebird is a sweet shooter ! , thanks again and take care .
 Eric .