Author Topic: Draw length question. (Read 200 times)

DngrsDan · « **on:** January 17, 2009, 11:53:00 PM »

OK....always see the weight listed as X# @ 28 draw.

Is that measured at the belly or the back of the bow? :confused:

Focusource · « **Reply #1 on:** January 17, 2009, 11:57:00 PM »

I measure my draw length at the back. The 'clothespin on the shaft' trick works for me.

You got me thinking here. On the tiller tree, I have been measuring from the belly. I should be measuring from the back of the bow here as well. Thanks for bringing this to my attention.

Bjorn · « **Reply #2 on:** January 17, 2009, 11:58:00 PM »

Belly.

Bjorn · « **Reply #3 on:** January 17, 2009, 11:58:00 PM »

Sorry Back!!

DngrsDan · « **Reply #4 on:** January 18, 2009, 12:17:00 AM »

Yes, I know I measure MY draw length to the back of the bow. I was wondering if that is the way the bow is rated. The draw weight is measured to the back then?

30coupe · « **Reply #5 on:** January 18, 2009, 12:47:00 AM »

Yup! From the back. The back is always in the same place on every bow (farthest from the string). The belly can vary with the depth of the riser.

DngrsDan · « **Reply #6 on:** January 18, 2009, 12:53:00 AM »

OK 30coupe. Makes sense. Now I got it. Thanks.

News:

Author Topic: Draw length question. (Read 200 times)

DngrsDan

Draw length question.

Focusource

Re: Draw length question.

Bjorn

Re: Draw length question.

Bjorn

Re: Draw length question.

DngrsDan

Re: Draw length question.

30coupe

Re: Draw length question.

DngrsDan

Re: Draw length question.

Users currently browsing this topic:


LEFT HAND BOWS CLASSIFIEDS	TRAD GANG CLASSIFIEDS ACCESS	RIGHT HAND BOWS CLASSIFIEDS