3Rivers Archery



The Trad Gang Digital Market












Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


« previous next »
Pages: [1]   Go Down

Author Topic: anybody saw the 100 gr. land shark with the wide cut?  (Read 475 times)

Offline fountain

  • Trad Bowhunter
  • **
  • Posts: 377
anybody saw the 100 gr. land shark with the wide cut?
« on: January 22, 2009, 04:51:00 PM »
i know i saw them recently and now i cant find them.  i know most poeple shoot a lot heavier, i just want to get some to try and experiment with.  they are 100 gr. with a 1.5" cut diameter.  if anyone else can locate them i sure would appreciate it.
Logged

Offline fountain

  • Trad Bowhunter
  • **
  • Posts: 377
Re: anybody saw the 100 gr. land shark with the wide cut?
« Reply #1 on: January 23, 2009, 11:57:00 AM »
i know somebody has seen them and know where i can get some
Logged

Offline RC

  • Trad Bowhunter
  • **
  • Posts: 4450
Re: anybody saw the 100 gr. land shark with the wide cut?
« Reply #2 on: January 23, 2009, 07:12:00 PM »
I`ve never seen a 100 grain Simmons head.RC
Logged

Offline Elk whisperer

  • Trad Bowhunter
  • **
  • Posts: 285
Re: anybody saw the 100 gr. land shark with the wide cut?
« Reply #3 on: January 24, 2009, 11:44:00 AM »
I know where some are for sale looked like a good head.
Logged
The older I get the better I was

Offline deermaster1

  • Trad Bowhunter
  • **
  • Posts: 325
Re: anybody saw the 100 gr. land shark with the wide cut?
« Reply #4 on: January 24, 2009, 11:51:00 AM »
sounds like an awesome head.  a 1.5" 2 blade would be awesome.  let me know if you find out more, ya got me VERY interested.
Logged
"I dont want my country to do anything for me, I want to do everything I can do for my country"~~~Ted Nugent

Offline fountain

  • Trad Bowhunter
  • **
  • Posts: 377
Re: anybody saw the 100 gr. land shark with the wide cut?
« Reply #5 on: January 24, 2009, 12:34:00 PM »
who said anything about serrated baldes.  i think they would be a good head and i may not even use them in the longbow. i found the a week or so ago when i was trying to get in touch with simmons--with not luck.  i was gonna try a new set up and they will be a great candidate.  a 1.5" cut diameter not overall length.
Logged

Offline smokin feathers

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 430
Re: anybody saw the 100 gr. land shark with the wide cut?
« Reply #6 on: January 24, 2009, 03:14:00 PM »
razorsharks, they fly great even at over 300 fps and sharpen easily.
Logged
Smoke

TGMM-FAMILY OF THE BOW

Offline ChuckC

  • Trad Bowhunter
  • **
  • Posts: 6775
Re: anybody saw the 100 gr. land shark with the wide cut?
« Reply #7 on: January 24, 2009, 07:44:00 PM »
except we don't USE compounds on this site.
ChuckC
Logged

Offline jacobsladder

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 3161
Re: anybody saw the 100 gr. land shark with the wide cut?
« Reply #8 on: January 24, 2009, 08:22:00 PM »
ive got a couple packs of these..but i havent seen the 1.5" ..i also have a pack of razorsharks that will be in our bunny hunt raffle...

 
Logged
TGMM Family of the Bow

"There's a race of men that dont fit in, A race that can't stay still; So they break the hearts of kith and kin, And they roam the world at will"  Robert Service

Offline ChuckC

  • Trad Bowhunter
  • **
  • Posts: 6775
Re: anybody saw the 100 gr. land shark with the wide cut?
« Reply #9 on: January 24, 2009, 08:29:00 PM »
Simmon's site shows a 100 grain Razor Shark.  There is also a "new" bleeder that is described as fitting only the 100 grain Land Shark.  Course, there is no reference at all to a 100 grain Land shark in the site.

The site is messed up and does not open to nearly any links for the broadhead descriptions.
ChuckC
Logged

Offline fountain

  • Trad Bowhunter
  • **
  • Posts: 377
Re: anybody saw the 100 gr. land shark with the wide cut?
« Reply #10 on: January 24, 2009, 11:44:00 PM »
jacobsladder--that may be what i found.  i may have mistook the width for the length.  either way this is the head i found.  i would like to try some.  i wuold like a little wider, but they will still work well.  i may be going to a full lenght 35/55 and drop point weight to get a good bare shaft, not sure yet.  if it bare shafts good, then i will get some to try for sure.
Logged

Offline Oliverstacy

  • Trad Bowhunter
  • **
  • Posts: 1915
Re: anybody saw the 100 gr. land shark with the wide cut?
« Reply #11 on: January 25, 2009, 01:09:00 AM »
I have a 3 pack of Razor Sharks...SS with solid blades.  The look the simular to Jacobsladder's shown above.

Josh
Logged
Custom Flemish Strings by Oliverstacy!  
Kanati 60" 57@29"
AP Cumberland 66" 58@29"
WhisperStik KajikaStik 56" Recurve with Canebrakes...57@28"
WhisperStik KajikaStik aka "Wormy" RC & LB,both 55@29"
Martin Savannah 50@28"
Kota Kill-um 55@28"
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©