3Rivers Archery



The Trad Gang Digital Market












Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


« previous next »
Pages: [1]   Go Down

Author Topic: Superglue undo  (Read 780 times)

Offline laughing turtle

  • Trad Bowhunter
  • **
  • Posts: 40
Superglue undo
« on: January 30, 2009, 02:40:00 PM »
I have mistakenly superglued the wrong inserts into some carbon shafts.  Any tricks on how to un-bond or am i stuck with it?  Any tips would be greatly appreciated.
Logged

Offline jimmerc

  • Trad Bowhunter
  • **
  • Posts: 920
Re: Superglue undo
« Reply #1 on: January 30, 2009, 02:45:00 PM »
I used to put a feild tip into the incert and heat just the feild tip slow and pull with pliers at same time,take care not to hit the carbon with heat!!
Logged
1- kajika stik combo,RC 55@28/LONGBOW 57@28 Both W/diamondback skins

1- monarch longbow royal 68" 59@28
1- bear kodak hunter-44@28

Online pdk25

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 4946
Re: Superglue undo
« Reply #2 on: January 30, 2009, 03:01:00 PM »
Drill bit into shaft from nock end, then sling it into the insert like a sledgehammer.  May take several swings.  Use the largest/heaviest bit that will freely slide.
Logged

Offline laughing turtle

  • Trad Bowhunter
  • **
  • Posts: 40
Re: Superglue undo
« Reply #3 on: January 30, 2009, 03:17:00 PM »
Great advice.  I will give it a try.  Thanks
Logged

Offline killinstuff

  • Trad Bowhunter
  • **
  • Posts: 1049
Re: Superglue undo
« Reply #4 on: January 30, 2009, 03:43:00 PM »
They make superglue remover. Check the hardware store.
Logged
lll

Offline KSdan

  • Trad Bowhunter
  • **
  • Posts: 2463
Re: Superglue undo
« Reply #5 on: January 30, 2009, 03:47:00 PM »
Second the heat on the screw in tip. . . has always worked for me.  Just be cautious
Logged
If we're not supposed to eat animals ... how come they're made out of meat? ~anon

Bears can attack people- although fewer people have been killed by bears than in all WWI and WWII combined.

Offline Greg Skinner

  • Trad Bowhunter
  • **
  • Posts: 279
Re: Superglue undo
« Reply #6 on: January 30, 2009, 03:58:00 PM »
I've tried the drill bit routine.  In theory it ought to work, but it didn't for me.  However if I shoot at my target and miss and hit the railroad tie backing behind it the inserts often come out as I attempt to extricate my arrow from the tie (even when I don't want them to). Probably shooting into a tree trunk would work if you don't have any rr ties handy.
Logged
And in the end of our exploring we shall return to the place where we started and know that place for the first time.

Offline BEN

  • Trad Bowhunter
  • **
  • Posts: 1105
Re: Superglue undo
« Reply #7 on: January 30, 2009, 05:40:00 PM »
I just got done removing 6 inserts myself:
Used propane torch on low; screwed in a field-tip just 2-3 threads and heated slow while turning for roughly 30 seconds or so. Then using pliers, I screwed in the tip all the way in and pulled steadily. All inserts came right out.
Pull straight out; don't wiggle tip to try and get it out or you will crack the carbon shaft ( I did that once). If it doesn't come out, just re-heat another 10 seconds or so and it will.

Ben
Logged
Ben
M.O.A.B  54# Thunderstick
Ancient Spirits 62# "Thunderhawk"
Browning Wasp 45#

"VEGETARIAN"----Old Indian word for "BAD HUNTER".

Offline NightHawk

  • Trad Bowhunter
  • **
  • Posts: 835
Re: Superglue undo
« Reply #8 on: January 31, 2009, 12:24:00 AM »
finger nail polish remover (acetone) poured into the nock end should debond the superglue
Logged
1) Gen. 21:20
And God was with the lad, he grew, and he dwelt in the wilderness, and he became an archer
2)The democracy will cease to exist when you take away from those who are willing to work and give to those who would not.
Thomas Jefferson

Offline Gator1

  • Trad Bowhunter
  • **
  • Posts: 2987
Re: Superglue undo
« Reply #9 on: January 31, 2009, 06:28:00 AM »
Great tip on the Nail Polish Remover, does that really work??
Logged

Offline NightHawk

  • Trad Bowhunter
  • **
  • Posts: 835
Re: Superglue undo
« Reply #10 on: January 31, 2009, 12:28:00 PM »
yes finger nail polish remover has acetone in it. You can also buy acetone in the can some walmarts carry it in the paint dept.
Logged
1) Gen. 21:20
And God was with the lad, he grew, and he dwelt in the wilderness, and he became an archer
2)The democracy will cease to exist when you take away from those who are willing to work and give to those who would not.
Thomas Jefferson

Offline ISP 5353

  • Trad Bowhunter
  • **
  • Posts: 1304
Re: Superglue undo
« Reply #11 on: January 31, 2009, 12:30:00 PM »
Will heat or acetone work when they are glued in with Goat Tuff?
Logged

Offline NightHawk

  • Trad Bowhunter
  • **
  • Posts: 835
Re: Superglue undo
« Reply #12 on: January 31, 2009, 10:26:00 PM »
not sure about goat tuff but it does work with superglue
Logged
1) Gen. 21:20
And God was with the lad, he grew, and he dwelt in the wilderness, and he became an archer
2)The democracy will cease to exist when you take away from those who are willing to work and give to those who would not.
Thomas Jefferson

Offline BEN

  • Trad Bowhunter
  • **
  • Posts: 1105
Re: Superglue undo
« Reply #13 on: February 02, 2009, 11:42:00 AM »
I used the method I stated above for several different glues, including goat tuff, and duco cement.
I think heat will break most glue bonds, IMO

ben   :thumbsup:
Logged
Ben
M.O.A.B  54# Thunderstick
Ancient Spirits 62# "Thunderhawk"
Browning Wasp 45#

"VEGETARIAN"----Old Indian word for "BAD HUNTER".

Offline metsastaja

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 1165
Re: Superglue undo
« Reply #14 on: February 02, 2009, 04:25:00 PM »
I had the same problem and called a couple dealers.
They were very reluctant to suggest heat in that it can weaken the expoxy that bonds the carbon shafts.
Logged
Les Heilakka
TGMM Family of the Bow  
Some times the uneventful nights are just as good if not better than the eventful ones

Offline laughing turtle

  • Trad Bowhunter
  • **
  • Posts: 40
Re: Superglue undo
« Reply #15 on: February 02, 2009, 04:45:00 PM »
Drill bit trick worked like a charm and no worries about overheating.
Logged
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©