3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: Carbon Express Heritage Shafts for me?  (Read 288 times)

Offline Butchie

  • Trad Bowhunter
  • **
  • Posts: 944
Carbon Express Heritage Shafts for me?
« on: February 14, 2009, 01:13:00 PM »
I am interested in trying the CX Heritage shafts.  I am shooting a Liberty English longbow 47# @ 30".  If I'm correct, it looks like I will be on the borderline of the 150 or 250 shafts.  Could anyone give me some advice on which shaft and point weight combos they think would work best. Thanks for your help!
"Don't worry about the old blind mule, just keep a load in the wagon!"

Offline cahaba

  • Trad Bowhunter
  • **
  • Posts: 1773
Re: Carbon Express Heritage Shafts for me?
« Reply #1 on: February 14, 2009, 01:47:00 PM »
I shoot a Liberty English 50# at my draw and I shoot CX 150s cut 29 1/2 bop with 250 grains up front. They bare shafted great and fly good. I believe the 250s would be a little stiff. You would really have to load the front up on them.
cahaba: A Choctaw word that means
"River from above"

Offline J.Williams

  • Trad Bowhunter
  • **
  • Posts: 972
Re: Carbon Express Heritage Shafts for me?
« Reply #2 on: February 14, 2009, 01:50:00 PM »
Might help a little if we knew your draw length,rough arrow weight you'd like and how close to center cut your bow is.

Offline J.Williams

  • Trad Bowhunter
  • **
  • Posts: 972
Re: Carbon Express Heritage Shafts for me?
« Reply #3 on: February 14, 2009, 01:54:00 PM »
Cahaba posted before me and sounds like he knows what he's talking about so I'll just get out of the way.   :)

Offline pooahl

  • Trad Bowhunter
  • **
  • Posts: 55
Re: Carbon Express Heritage Shafts for me?
« Reply #4 on: February 14, 2009, 02:35:00 PM »
I shoot 250's out of a heavier recurve. You'll want the 150's, assuming you're drawing the full 47lbs. I believe the chart runs a bit stiff.  Start longer than you expect and trim down gradually in quarter-inch increments and you'll dial in the right spine.  These are very good shafts - tough and heavy.

Offline Aggie1993

  • Trad Bowhunter
  • **
  • Posts: 468
Re: Carbon Express Heritage Shafts for me?
« Reply #5 on: February 14, 2009, 05:42:00 PM »
150's
Phil 4:13 "I can do all things through Christ who gives me strength."

Kempf Trophy Hunter 58" 51@28
Kempf Kwyk Styk 58" 51@28
Kempf Kwyk Styk 58" 54@28
Kempf Trophy Hunter 58" 51@28

Offline R H Clark

  • Trad Bowhunter
  • **
  • Posts: 1089
Re: Carbon Express Heritage Shafts for me?
« Reply #6 on: February 14, 2009, 07:17:00 PM »
If you draw 30" you could probably shoot either one.The 150 with regular insert and 125 tip or the 250 with more weight up front.

The main thing is to start testing full length and don't cut untill you are sure you need to.

Offline Shawn Leonard

  • Trad Bowhunter
  • **
  • Posts: 7837
Re: Carbon Express Heritage Shafts for me?
« Reply #7 on: February 14, 2009, 08:05:00 PM »
Sorry to disagree with R H but the 250s even left full length and 275-325 up front would most likely still be too stiff. I shoot 150s cut to 29.5"s with 175 up front out of my 52-54# at 28" high performance recurves. Shoot the 150 cut to 31"s and at least 175 up front, but more like 225 may be best. I am sure you will fall right in that range. Shawn
Shawn

Offline Butchie

  • Trad Bowhunter
  • **
  • Posts: 944
Re: Carbon Express Heritage Shafts for me?
« Reply #8 on: February 15, 2009, 09:12:00 AM »
Thanks everyone!
"Don't worry about the old blind mule, just keep a load in the wagon!"

Offline NDTerminator

  • Trad Bowhunter
  • **
  • Posts: 1181
Re: Carbon Express Heritage Shafts for me?
« Reply #9 on: February 15, 2009, 10:33:00 AM »
For my thin & dusty dime, if on the borderline I go with the heavier spine, particularly for broadheads.

I shoot 29.5"-30" 4560/250 CX's with 50 grain inserts & 125 grain points from my 50#-55# recurves and get great arrow flight & accuracy...
"As Trad as I wanna be"

"It's all just archery, and all archery is good"

Offline dragon rider

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 834
Re: Carbon Express Heritage Shafts for me?
« Reply #10 on: February 15, 2009, 11:10:00 AM »
Butchie,

Sent you a PM.
Don't meddle in the affairs of dragons; people are crunchy and taste good with ketchup.

TGMM Family of the Bow

Offline Shawn Leonard

  • Trad Bowhunter
  • **
  • Posts: 7837
Re: Carbon Express Heritage Shafts for me?
« Reply #11 on: February 15, 2009, 12:45:00 PM »
Why in the world would you want a stiffer spine with a broadhead, ya want a shaft that bareshafts a tad weak. i have shot the heritage series exclusively for the last 4 years and have had 25 or 30 bows over that time and I have a pretty good idea what will and won't work. Sorry but I have seen some guys perfect arrow flight and I believe most of the time it isn't even average. Shawn
Shawn

Offline R H Clark

  • Trad Bowhunter
  • **
  • Posts: 1089
Re: Carbon Express Heritage Shafts for me?
« Reply #12 on: February 15, 2009, 04:32:00 PM »
No problem Shawn.

For me there seems to be a great difference between bows, strings and degree of cut to center.When I'm not sure I just buy a couple of each to test.

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©