Author Topic: Fuller -Plast users (Read 788 times)

Crooked Stic · « **on:** March 17, 2007, 03:42:00 PM »

Can you get too much catalyst in the mix. If so what would the effects be?

Kevin Breaux · « **Reply #1 on:** March 17, 2007, 05:08:00 PM »

As the directions read, it would harden faster.

Peckerwood · « **Reply #2 on:** March 17, 2007, 06:19:00 PM »

I have found that if you use to much catalyst the finish has a tendency to crack on the working part of the limbs and will chip easier. This cracking can also be caused by applying to much finish to the limbs.
Bill

Crooked Stic · « **Reply #3 on:** March 17, 2007, 06:42:00 PM »

I am thinking I am going back to T-bird.

sidebuster · « **Reply #4 on:** March 17, 2007, 07:47:00 PM »

Never had a problem. Just follow the mixing instructions exactly as shown.

sidebuster · « **Reply #5 on:** March 17, 2007, 07:49:00 PM »

Never had a problem. Just follow the instructions exactly as described.

Jim Neaves · « **Reply #6 on:** March 17, 2007, 09:35:00 PM »

Just add 1.9 ml of catylist to an ounce of finish and you will never have a problem.

Bryan · « **Reply #7 on:** March 17, 2007, 10:29:00 PM »

Good idea...You can't beat T-Bird

Bryan M. Lee

News:

Author Topic: Fuller -Plast users (Read 788 times)

Crooked Stic

Fuller -Plast users

Kevin Breaux

Re: Fuller -Plast users

Peckerwood

Re: Fuller -Plast users

Crooked Stic

Re: Fuller -Plast users

sidebuster

Re: Fuller -Plast users

sidebuster

Re: Fuller -Plast users

Jim Neaves

Re: Fuller -Plast users

Bryan

Re: Fuller -Plast users

Users currently browsing this topic:


LEFT HAND BOWS CLASSIFIEDS	TRAD GANG CLASSIFIEDS ACCESS	RIGHT HAND BOWS CLASSIFIEDS