3Rivers Archery



The Trad Gang Digital Market












Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


« previous next »
Pages: [1]   Go Down

Author Topic: crack in riser, HELP!!!  (Read 424 times)

Offline canadian

  • Trad Bowhunter
  • **
  • Posts: 182
crack in riser, HELP!!!
« on: March 22, 2009, 07:51:00 PM »
I went stump shooting today and was admiring my bow (Brack Quest) when I noticed a small crack on the edge of the shelf and down towards the grip.  It is very small but it is definately a crack.  How can I stop it from spreading?  A little history of the bow I got it new just over two years ago, and this time last year I sent it away to have the grip professionally checkered.  It is my favorite bow and I don't want it to get ruined.  What can I do.  Thanks, Jonathan
Logged
murph

Offline Shawn Leonard

  • Trad Bowhunter
  • **
  • Posts: 7837
Re: crack in riser, HELP!!!
« Reply #1 on: March 22, 2009, 09:12:00 PM »
Call Bill and see what he says! Shawn
Logged
Shawn

Offline Buckeye Trad Hunter

  • Trad Bowhunter
  • **
  • Posts: 1096
Re: crack in riser, HELP!!!
« Reply #2 on: March 22, 2009, 09:18:00 PM »
is it an actual crack or is it in between the layers where it is glued together.
Logged

Offline d. ward

  • Trad Bowhunter
  • **
  • Posts: 5791
Re: crack in riser, HELP!!!
« Reply #3 on: March 22, 2009, 09:29:00 PM »
would you have a pic or two maybe ? bowdoc
Logged

Offline Jwilliam

  • Trad Bowhunter
  • **
  • Posts: 2926
Re: crack in riser, HELP!!!
« Reply #4 on: March 22, 2009, 09:43:00 PM »
Like Shawn said, call Bill. I'm sure he will take care of you.


Bill
Logged

Offline Danny Rowan

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 4345
Re: crack in riser, HELP!!!
« Reply #5 on: March 23, 2009, 04:04:00 AM »
Call Bill!! If it is only two years old he will make it right. What wood is in the riser? Could just be a drying check. Some woods, ie, cocobolo,ebony and osage are bad about drying checks. When you had it checkered, did they refinish the riser? Maybe the finish was gone from the checkering. Just tossing out some thoughts.

Danny
Logged
"When shooting instinctivly,it matters not which eye is dominant"

Jay Kidwell and Glenn St. Charles

TGMM Family Of The Bow
NRA Life/Patron member
NAHC life member
Retired CPO US Navy 1972-1993
Retired USCBP Supervisory Officer 1999-2017

Offline Whip

  • Moderator
  • Trad Bowhunter
  • ***
  • Posts: 8189
Re: crack in riser, HELP!!!
« Reply #6 on: March 23, 2009, 07:48:00 AM »
That is a common spot for checking to occur, especially with certain types of woods like Danny said.  Very likely can be fixed with CA glue (superglue)  without further problems.  But as suggested, check with Bill, and send him some close up pictures.  He will likely offer to take care of it for you and refinish the riser after stabilizing the crack.
Logged
PBS Regular Member
WTA Life Member
In the end, it is not the years in your life that count. It's the life in your years. Abraham Lincoln.

Offline canadian

  • Trad Bowhunter
  • **
  • Posts: 182
Re: crack in riser, HELP!!!
« Reply #7 on: March 23, 2009, 05:09:00 PM »
Thanks all.
Logged
murph

Offline SERGIO VENNERI

  • Trad Bowhunter
  • **
  • Posts: 1306
Re: crack in riser, HELP!!!
« Reply #8 on: March 23, 2009, 10:32:00 PM »
Post pics if you can Jon.If it is a crack in the shelf/grip area i would recommend sending it back and have the bowyer cut the cracked part out in a radius and put in a saddle and then reshape the grip and shelf, refinish .
Logged

Offline amar911

  • Trad Bowhunter
  • **
  • Posts: 2860
Re: crack in riser, HELP!!!
« Reply #9 on: March 24, 2009, 12:24:00 AM »
I guarantee you Bill will know what to do and will go out of his way to make it right. He is the first person to ask. Few bowyers are as knowledgeable and skillful as Bill, and he takes great pride in his bows.

Allan
Logged
TGMM Family of the Bow

Offline LocDoc

  • Trad Bowhunter
  • **
  • Posts: 63
Re: crack in riser, HELP!!!
« Reply #10 on: March 24, 2009, 08:36:00 AM »
I've got a Martin Hunter that I would love to have back in service.

But...Bill who?
Logged
'Aim small. Miss small.'

Offline WildmanSC

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 1663
Re: crack in riser, HELP!!!
« Reply #11 on: March 24, 2009, 03:51:00 PM »
Bill Howland, the owner of Brackenbury bows.

 http://www.brackenburybows.com/

Bill
Logged
TGMM Family of the Bow

-----------------------------------
Groves Flame Recurve 62", 45#@28"


Praise the Lord Jesus Christ, He is Worthy
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©