Nock Adaptors

[neuse]

Does anyone know where to get some knock adaptors for 9/16" uni bushings? I want to be able to use index knocks.

[Paul Mattson]

Not adapter for a uni-bushing?  What shafts are you using?  The smallest nock adapters that I have are for Arrow Dynamics and Grizzly stiks.
You would replace the uni-bushing with the nock adapter.

[JRY309]

Easton used to make a nock adapters that fit in the uni-bushings for glue on nocks,but they have long been discontinued.They made them when uni-bushing's first came out.I believe Easton XX78 were some of the first aluminum arrows to use the uni-bushing system.I bought the nock adapters for my XX78 2317 for using glue-on nocks,many years ago.

[Curtis Roberts]

What's wrong with the uni-bushings?  I thought they would be better than glue on.

[neuse]

They are the Easton Platinum xx75.
I am new to aluminum arrows as I have always used wood, so I did not what the uni bushing was till I got them and do not like the little knocks.
BadgerArrow, do you mean to cut the arrow and you have something I could use.

[wtpops]

Im dont know the Platinum arrow but if it is all aluminum you can heat it and pull the unibushing out. Of course this would only work if you have somthing to replace it with.