Question about black widow tiller

[OBIOU HUNTER]

Hello,

 I'm going to buy a used black widow PMA in very good condition.

 But I've got a queston: a bow that was made for shooting "3 fingers under" could be used for shooting 2 fingers under and one finger on the top of the nock-set ?

 Thanks
           Christophe

[Lefty]

This is from the Black Widow website under frequently asked questions.  I realize it is the opposite of your situation, but the end answer is still the same.  You will probably not need a higher nock point or have any additional noise going from 3 under tiller to split finger shooting though.  
Q: “My bow has standard tiller. Can I shoot it 3 fingers under?”

A: Yes. You will not damage the bow. It may require a higher nock height and may make your bow a little louder. There is a 1/8" difference in standard tiller and 3 fingers under. Most bows, people can shoot either way.

[OBIOU HUNTER]

I saw this reply on BW website but I was not sure it would be safe on my bow as it's the opposite of my situation.

 Thanks for learning me the words: "split finger"
 I' m french and I didn't know how to tell this position of the fingers on the string.

  Thanks

[R H Clark]

It will be safe,no problem.You should be able to tune it fine also.Probably just have a lower nock point than you normaly use.

[Arrowhead80]

I bought a used PMA last sunday from a three under shooter,I moved the knock down one eighth to shoot split and it works great.