3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: Alloy arrows for Bear and THANKS  (Read 235 times)

Offline saumensch

  • Trad Bowhunter
  • **
  • Posts: 915
Alloy arrows for Bear and THANKS
« on: June 16, 2009, 11:25:00 AM »
Hi Folks,

first i wanted to thank one Tradganger, who´ll now when he reads this, for the easy enjoyable selling one of his bows to me. thanks for youre efforts, its a beauty!

SECOND i wanted to ask all those who know theire way round with alloy arrows.
THe new bow is a 50# recurve, i draw 53,4# @ my 29" draw (meassured). I shoot with a dacron string.
I tried 2216 Easton Legacyies in 29 and a half inches with 125gr. upfont. They shoot well though you notice they are heavy. I get good groupings and hit well BUT doing a papertuning, they behave to heavy in spine.
I also tried some 2314 in 30" and they were perfect in paper tuning and slightly silencer with the bow, i hit slightly more inconcistent.

What should i do?

I thought about adding point weight to the 2216s but i want to have field points in the same weight, so iam already on top.

THX for help and sugestions!
And sometimes our dreams they float like anchors in hopeless waters oh way down here
Sometimes it seems that all that matters most are all the things that you can't keep
(William Elliot Whitmore)

Offline Kingwouldbe

  • Trad Bowhunter
  • **
  • Posts: 966
Re: Alloy arrows for Bear and THANKS
« Reply #1 on: June 16, 2009, 12:22:00 PM »
Hi saumensch,

There is a lot of things you could do, I'll list a few.

Fast flight string.
2215 arrow.
145 grain tip.
leave your arrow longer.

The 2314 is going in the wrong direction, you want to go to a smaller diameter shaft for hunting ( better penetration )

Keep testing until you come up with the right arrow for your bow and your stile of shooting.

Offline vermonster13

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 14572
Re: Alloy arrows for Bear and THANKS
« Reply #2 on: June 16, 2009, 12:27:00 PM »
Try a 2016 with a few different point weights and you should find the magic set-up.
TGMM Family of the Bow
For hunting to have a future, we must invest ourselves in future hunters.

Offline saumensch

  • Trad Bowhunter
  • **
  • Posts: 915
Re: Alloy arrows for Bear and THANKS
« Reply #3 on: June 16, 2009, 12:52:00 PM »
Thanks KINGWOULdBE, i dont wana use FF because its an old bow, ill consider the rest.

Vermonster13, you sure? i used 2016 on my 45# longbow and so i figured theyd be to light in spine??
And sometimes our dreams they float like anchors in hopeless waters oh way down here
Sometimes it seems that all that matters most are all the things that you can't keep
(William Elliot Whitmore)

Offline vermonster13

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 14572
Re: Alloy arrows for Bear and THANKS
« Reply #4 on: June 16, 2009, 03:04:00 PM »
I shoot them off of several FF bows in the same to a little heavier weight as your's and they do fine.
TGMM Family of the Bow
For hunting to have a future, we must invest ourselves in future hunters.

Offline Killdeer

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 9147
Re: Alloy arrows for Bear and THANKS
« Reply #5 on: June 16, 2009, 09:08:00 PM »
2016.   :readit:  

Killdeer   :wavey:
Long, long afterward, in an oak I found the arrow, still unbroke;
And the song, from beginning to end, I found again in the heart of a friend.

~Longfellow

TGMM Family Of The Bow

Offline saumensch

  • Trad Bowhunter
  • **
  • Posts: 915
Re: Alloy arrows for Bear and THANKS
« Reply #6 on: June 17, 2009, 04:40:00 AM »
So thanks, i will try those 2016s.

"You cant go wrong if you listen to tradgangers!"
-old indian proverb-  ;-)
And sometimes our dreams they float like anchors in hopeless waters oh way down here
Sometimes it seems that all that matters most are all the things that you can't keep
(William Elliot Whitmore)

Offline Novaln1975

  • Trad Bowhunter
  • **
  • Posts: 389
Re: Alloy arrows for Bear and THANKS
« Reply #7 on: June 25, 2009, 01:02:00 AM »
Glad you like the bow Axel. It was a pleasure doing business with you too. Hope you find the right arrows. I used Carbon express heritage 150s, 30 inches long with 145 gr points and weight tubes (3 gr per inch). Worked for me...

Simon

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©