3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: More forgiving  (Read 375 times)

Offline weedwacker

  • Trad Bowhunter
  • **
  • Posts: 45
More forgiving
« on: August 24, 2009, 02:39:00 PM »
Looking for something more forgiving than my Morrison ILF.  Looking at Bob Lee's stuff.  Any opinions?  More or less forgiving?  The same?

Offline FerretWYO

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 5099
Re: More forgiving
« Reply #1 on: August 24, 2009, 04:40:00 PM »
What do you mean by more forgiving?
TGMM Family of The Bow

Online Orion

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 8252
  • Contributing Member
Re: More forgiving
« Reply #2 on: August 24, 2009, 07:44:00 PM »
Longer ILF limbs would probably do it.

Offline weedwacker

  • Trad Bowhunter
  • **
  • Posts: 45
Re: More forgiving
« Reply #3 on: August 24, 2009, 09:34:00 PM »
Quote
Originally posted by FerretWYO:
What do you mean by more forgiving?
Great question!  I am not a very experienced recurve shooter so I was relating this to the compounds I am used to.  A compound with a longer brace height is usually more forgiving of my mistakes than one with a shorter brace height.  I figured there might be a similar formula for recurves.

Offline James Wrenn

  • Trad Bowhunter
  • **
  • Posts: 1933
Re: More forgiving
« Reply #4 on: August 24, 2009, 10:02:00 PM »
Longer bow,less string angle for better release,longer sight window.higher brace height ect all translate into an easier bow to shoot.There is a reason target bows are always longer bows. jmo
....Quality deer management means shooting them before they get tough....

Offline Gil

  • Trad Bowhunter
  • **
  • Posts: 756
Re: More forgiving
« Reply #5 on: August 24, 2009, 10:09:00 PM »
Longer limbs and higher brace height would make your bow more forgiving.But a perfect tune would also make a forgiving bow,any bow for that matter.You can twist up the string to increase your brace height and see what happens first.Good luck.
There's plenty of room for all of God's creatures.Right next to the mashed potatoes.

One can pay back the loan of gold, but one dies forever in debt to those who are kind."

COMPTON TRADITIONAL BOWHUNTERS

Offline FerretWYO

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 5099
Re: More forgiving
« Reply #6 on: August 24, 2009, 11:44:00 PM »
As gil and james said a longer bow will be a little more forgiving. as id does reduce the string angle and make a clean release a little easier. as gil said a well tuned set up will help the most. Make some small controled changes and see if it helps you.
TGMM Family of The Bow

Offline amar911

  • Trad Bowhunter
  • **
  • Posts: 2860
Re: More forgiving
« Reply #7 on: August 25, 2009, 12:07:00 AM »
There is not much that would be more forgiving than a Morrison ILF unless you add weight or length. Comparing a recurve to a compound will only get you frustrated. Of course, if you want to go to the Olympic style bow where you start adding all kinds of devices to stabilize and balance the bow you can definitely get something that is more forgiving of your mistakes. But you will have a lot of trouble trying to hunt with a setup like that!

Since you are "not a very experienced recurve shooter", perhaps you should spend some more time getting comfortable with your Morrison. It is a fantastic bow!! You may also want to head down south one state to Arkansas and spend a couple of days with Rick Welch to get help with your equipment setup and shooting skills. Rick makes his own line of bows that you could try out. I have never shot one, but many people who have say it is the most forgiving bow they have ever shot. I have a hard time believing Rick's bows are a lot more forgiving than a Morrison ILF, but what do I know?

Allan
TGMM Family of the Bow

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©