3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: Repairing Targets w/ Spray Foam?  (Read 1226 times)

Offline Eric Krewson

  • Trad Bowhunter
  • **
  • Posts: 3126
Re: Repairing Targets w/ Spray Foam?
« Reply #20 on: October 22, 2009, 09:51:00 AM »
Nother question, Did you shake the can of great stuff up real well before you used it?

Offline Mike Lee

  • Trad Bowhunter
  • **
  • Posts: 82
Re: Repairing Targets w/ Spray Foam?
« Reply #21 on: October 22, 2009, 10:09:00 AM »
Deadbolt
I bought a can of Dow water base foam that did the same thing. I did everything I could think of and I still had a mess. It never would set up. I cleaned the stuff off the target and bought a can of great stuff and it worked fine. I have used some other generic stuff in a black can from Menards that worked fine also. The methods above like Eric Krewson stated are what I use and have repaired several targets. You may have just got a can of bad foam. I Probably won't buy another can of the Dow foam.

Offline Blacky

  • Trad Bowhunter
  • **
  • Posts: 72
Re: Repairing Targets w/ Spray Foam?
« Reply #22 on: October 22, 2009, 05:35:00 PM »
The best foam I had used is from 3-D Country. The target will be as good as new or sometimes even better(more durable)than new. There's lots of infos and a how-to video on their website 3-dcountry.com

Blacky
Shoot straight and keep'em sharp

Blacky

Offline gregg dudley

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 4879
Re: Repairing Targets w/ Spray Foam?
« Reply #23 on: October 22, 2009, 06:36:00 PM »
Shake the can and then shake it some more.  Unlike some of these guys I only tape one side of the target and then let the foam expand freely on the other side.  I let it dry well and then I use a razor knife to shave the excess.  Some times it takes a few days to cure, but it always works well for me.
MOLON LABE

Traditional Bowhunters Of Florida
Come shoot with us!

Offline Mo. Huntin

  • Trad Bowhunter
  • **
  • Posts: 734
Re: Repairing Targets w/ Spray Foam?
« Reply #24 on: October 22, 2009, 08:31:00 PM »
I don't cover the target with anything I just shoot it in a half a can at a time.  Then when it is done I just trim it back to shape.  I does take a couple days to set up good.

Offline Eric Krewson

  • Trad Bowhunter
  • **
  • Posts: 3126
Re: Repairing Targets w/ Spray Foam?
« Reply #25 on: October 22, 2009, 08:47:00 PM »

Offline Gene Wensel

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 529
Re: Repairing Targets w/ Spray Foam?
« Reply #26 on: October 23, 2009, 08:56:00 AM »
Gatekeeper Tom says
  "I have a target I shot completely in half and instead of trying to fill the big void area of vitals...."  
HAHAHAHA! Now thats funny right there, I don't care who you are!

Offline Whip

  • Moderator
  • Trad Bowhunter
  • ***
  • Posts: 8189
Re: Repairing Targets w/ Spray Foam?
« Reply #27 on: October 23, 2009, 10:15:00 AM »
Maybe he had some friens over to shoot.......
PBS Regular Member
WTA Life Member
In the end, it is not the years in your life that count. It's the life in your years. Abraham Lincoln.

Offline Deadbolt

  • Trad Bowhunter
  • **
  • Posts: 1090
Re: Repairing Targets w/ Spray Foam?
« Reply #28 on: October 25, 2009, 10:58:00 PM »
LOL

Sorry guys dont tell the misses but I'm on a getawat for the weekend and stuck on the wireless card haha

i redid the targets filled em good sealed them and cranked the heat in the barn to 80...took a few days but they cured up nice and tight!

Worked like a charm so the problem was moister and cold...no good!

I tested the smaller one when i gave it to my cousin and he shot it with a compound at 60# at 5 yards and stopped it like nothing!!

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©