mini chop saw blades

[boznarras]

I am looking at the mini chop saws at Harbor Freight for cutting carbon shafts. I don't see they sell an abrasive blade. Does anyone know a source for these blades, they are 2" diameter.

[boznarras]

Alternatively what cut off wheels work well with a dremel for carbons. I see different thicknesses, and foberglass reinforced, etc. What gives the best finish and lasts best?

[wingnut]

If you are looking at the 6" chop saw 7ou can use the 3" or 4.5" abrasive wheels they offer.

Mike

[Hot Hap]

I get mine from my bro-in-law, who has a service station. When he changes the wheels on his 4" grinder they are two inches in diameter. Hap

[Vincenzo]

I bought the same saw about 6 months ago. It doesnt always start when i flick the switch, it often helps to tap the top of the saw to get it working. It was inexpensive so i really can't complain too much. I found the 2" blades on a popular auction site ;-)

[akdd]

You might try looking at AIH (Alaska Industrial Hardware). The have quite an assortment of abrasive blades for die grinders and such so they might have some that will fit.

[pj starrett]

you  can order those blades off harbors website..i did

[lpcjon2]

I use my dremel with a regular cut off blade and you can flush it up with the flat part of the blade.

[lpcjon2]

just to add its not the woven fiber cut off wheels its the smooths ones they work the best.