3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: Glue for fletching carbon shafts  (Read 733 times)

Offline eagle24

  • Trad Bowhunter
  • **
  • Posts: 499
Glue for fletching carbon shafts
« on: April 12, 2007, 10:17:00 PM »
I fletched some GT traditional shafts last summer using Duco Cement after cleaning with denatured alchohol.  Had no problems and it was difficult to remove damaged feathers for repairs.  A few days ago I fletched a couple of Easton ST 400 carbon shafts using the same denatured alchohol and Duco Cement. The cement did'nt bond at all.  Feathers fell off and glue was easily removed with very little effort using my thumb nail.  What should I use as a cleaner and adhesive on Easton or Beman shafts?

Offline insttech1

  • Trad Bowhunter
  • **
  • Posts: 447
Re: Glue for fletching carbon shafts
« Reply #1 on: April 12, 2007, 10:25:00 PM »
Cleaner--hot water (from the tap, not the oven!) and wipe off the oils.  Some people use that special carbon-prep stuff...I don't bother, but it's up to you.

Glue with fletch-tite platinum in the silver tube, not the regular white...

Take Care,
Marc
"When you catch Hell--DROP IT!!  When you're going thru Hell--DON'T STOP!!"

Offline JRY309

  • Trad Bowhunter
  • **
  • Posts: 4383
Re: Glue for fletching carbon shafts
« Reply #2 on: April 12, 2007, 10:26:00 PM »
On carbon arrows I like to use wraps because it is alot easier to remove the fletching without scrapping the shaft.But for glue I use Platinum Fletch-tite whether I'm using wraps or glueing on the carbon arrow.I use the Platinum on all my arrows.

Offline Bowspirit

  • Trad Bowhunter
  • **
  • Posts: 1776
Re: Glue for fletching carbon shafts
« Reply #3 on: April 12, 2007, 10:28:00 PM »
Fletch-Tape...have yet to find and arrow it won't work on. Works just fine on my Axis 400's...
“I read somewhere of how important it is in life, not necessarily to be strong, but to feel strong. To measure yourself at least once.”
                -Alexander Supertramp

"Shoot this for me."
                -Chuck Nelson

Offline eagle24

  • Trad Bowhunter
  • **
  • Posts: 499
Re: Glue for fletching carbon shafts
« Reply #4 on: April 13, 2007, 09:27:00 AM »
Thanks.  I'll give the Platinum a try.  I know lots of folks use the fletch tape, but I just prefer to use glue.

Offline BobW

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 2318
Re: Glue for fletching carbon shafts
« Reply #5 on: April 13, 2007, 10:18:00 AM »
Steel Force "Beyond Bond"
1-3 minutes dry (set) time
Rock solid hold
"A sagittis hungarorum libera nos Domine"
>>---TGMM-Family-of-the-Bow--->
Member: Double-T Archery Club, Amherst, NY
St. Judes - $100k for 2010 - WE DID IT!!!!

Offline Chris Surtees

  • Trad Bowhunter
  • **
  • Posts: 5697
Re: Glue for fletching carbon shafts
« Reply #6 on: April 13, 2007, 10:20:00 AM »
Goat tuff

Offline dino

  • Trad Bowhunter
  • **
  • Posts: 1081
Re: Glue for fletching carbon shafts
« Reply #7 on: April 13, 2007, 04:48:00 PM »
Had a bunch of feathers come off Beman MFX shafts after using fletch tite platinum.  Shafts were cleaned with acetone.  I don't use it anymore on the Bemans or Axis shafts. I have been using kwik it thick and have had great success since.  I've used platinum on CX, goldtip, arrow dynamics, aluminums and glass shafts and it hold like nails.  Just have had to many bad experience with it on Easton carbons that I won't use it anymore. dino
"The most demanding thing you can ask of a piece of wood is for it to become an arrow shaft. You reduce it to the smallest of dimension yet ask it to remain it's strongest, straightest and most durable." Bill Sweetland

Offline Adam Mooney

  • Trad Bowhunter
  • **
  • Posts: 119
Re: Glue for fletching carbon shafts
« Reply #8 on: April 13, 2007, 05:07:00 PM »
I second the STEEL FORCE also DO NOT USE DUCO CEMENT WITH WRAPS.. It wont dry
Adam

Offline 2Knives

  • Trad Bowhunter
  • **
  • Posts: 323
Re: Glue for fletching carbon shafts
« Reply #9 on: April 15, 2007, 03:52:00 PM »
I use Saunders NPV, has been working for me for years...even on wraps.
USAF AMMO Retired

Shoot True!!!
Don't Squat with your Spurs on!

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©