3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: serving material  (Read 667 times)

Offline turkeyslayer

  • Trad Bowhunter
  • **
  • Posts: 110
serving material
« on: December 21, 2009, 10:50:00 PM »
Out of these three,what material do you like best & why...crown,diamondback or fastflight?

Offline turkeyslayer

  • Trad Bowhunter
  • **
  • Posts: 110
Re: serving material
« Reply #1 on: December 22, 2009, 10:12:00 AM »
ttt..anybody have an opinion? Looking for the best material that has the least amount of slippage,(sliding up & down the string)

Offline LBR

  • Trad Bowhunter
  • **
  • Posts: 4221
Re: serving material
« Reply #2 on: December 22, 2009, 10:15:00 AM »
I haven't tried crown.  Used diamondback once, didn't like it because the outer sheath pulled loose when I tied it off.  I use a little bit of FF serving, not too crazy about it.

My favorite serving is 62XS from BCY.

Chad

Offline TOEJAMMER

  • Trad Bowhunter
  • **
  • Posts: 730
Re: serving material
« Reply #3 on: December 22, 2009, 10:18:00 AM »
I personally like the BCY #62 serving material.  My experience is that it seems to outlast the string.

Offline Jeremy

  • Trad Bowhunter
  • **
  • Posts: 3242
Re: serving material
« Reply #4 on: December 22, 2009, 10:21:00 AM »
I haven't tried crown, but use diamondback and FF quite a bit.  I prefer the diamondback; lays flat, slick and durable.  I haven't had issues with the outer sheath pulling loose?
>>>-TGMM Family Of The Bow-->
CT CE/FS Chief Instructor
"Death is not the greatest loss in life.  The greatest loss is what dies inside us while we live." - Norman Cousins

Offline Jeremy

  • Trad Bowhunter
  • **
  • Posts: 3242
Re: serving material
« Reply #5 on: December 22, 2009, 10:22:00 AM »
Oh yeah, the #62 gets used a bunch too... kind of a toss up between it and the diamondback for me.
>>>-TGMM Family Of The Bow-->
CT CE/FS Chief Instructor
"Death is not the greatest loss in life.  The greatest loss is what dies inside us while we live." - Norman Cousins

Offline JRY309

  • Trad Bowhunter
  • **
  • Posts: 4383
Re: serving material
« Reply #6 on: December 22, 2009, 10:49:00 AM »
I use alot of different servings,No 62 in .018,.021 and .025,diamondback,3D and Halo.I use many different diameter servings to get the nock fit I'm looking for.

Offline Jason R. Wesbrock

  • Trad Bowhunter
  • **
  • Posts: 2507
Re: serving material
« Reply #7 on: December 22, 2009, 10:53:00 AM »
Diamondback seems to be popular around here, but I've never tried it. Out of the three on your list, the only one I have firsthand experience with is Fastflight, and I could never get it to not slip around.

Personally I use BCY #62 or Polygrip.

Offline Rob DiStefano

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 12246
  • Contributing Member
    • Cavalier Pickups
Re: serving material
« Reply #8 on: December 22, 2009, 11:00:00 AM »
i think i've tried just about everything out there in serving land ... hand's down, for me it's BCY Halo - man, that stuff is tough 'n' fairly slick slick.
IAM ~ The only government I trust is my .45-70 ... and my 1911.

Offline turkeyslayer

  • Trad Bowhunter
  • **
  • Posts: 110
Re: serving material
« Reply #9 on: December 22, 2009, 01:53:00 PM »
Where do you buy Halo?

Offline Dale in Pa

  • Trad Bowhunter
  • **
  • Posts: 203
Re: serving material
« Reply #10 on: December 22, 2009, 05:36:00 PM »
Crown and Halo for me. Both are super slick for a great release.

Offline LBR

  • Trad Bowhunter
  • **
  • Posts: 4221
Re: serving material
« Reply #11 on: December 22, 2009, 06:17:00 PM »
BCY manufactures/sells Halo.

I only tried the diamondback once--maybe I had a bad spool.

I like Halo also--very slick, very tough, but it's more prone to slipping than 62XS--especially is you use a large diameter serving on a tiny string.  It's not bad, just doesn't lock in as good as the 62.

Chad

Offline Pierre Lucas

  • SPONSOR
  • Trad Bowhunter
  • *****
  • Posts: 695
Re: serving material
« Reply #12 on: December 22, 2009, 06:36:00 PM »
Tried quite a few servings as everyone else has.  

What we found is that Diamondback was more abrasive on tabs and gloves than most.  Not a good clean release.

Halo was our second choice very slick but I agree with Chad was prone to slipping on the string and hard to double serve.  

Our first choice is Brownells Crown serving.  We tested it in various weather conditions and seemed to give us the best release cold, hot, wet or dry.  Locks up very tight, very slick, and durable.  Comes in 3 sizes to accomodate different serving diameters.  

We are using it till we find something better.

God Bless,   Pierre and Jean-Pierre
>>>--TGMM Family of the Bow---->

"if you're not living on the edge, you're taking up to much space..." God Knows!
>>>----->  SBD...Bow Strings ..."not just another bow string"   www.sbdbowstrings.com

Offline rp65

  • Trad Bowhunter
  • **
  • Posts: 186
Re: serving material
« Reply #13 on: December 22, 2009, 06:42:00 PM »
I,ve only used the Diamondback and never had any problems, make sure you wrap it so it gets tighter with the twisting of the string.

Offline Squint

  • Trad Bowhunter
  • **
  • Posts: 55
Re: serving material
« Reply #14 on: December 22, 2009, 07:08:00 PM »
Halo only for me,I get mine from Keystone country store.Probably one of the sponsors here also carry it

Offline dino

  • Trad Bowhunter
  • **
  • Posts: 1081
Re: serving material
« Reply #15 on: December 22, 2009, 07:35:00 PM »
I've used crown, diamondback and FF of the three I prefer FF.  It is slick and the most durable serving that I've ever used.  Never tried halo before but the FF lasts so long I probable won't ever need too either.  dino
"The most demanding thing you can ask of a piece of wood is for it to become an arrow shaft. You reduce it to the smallest of dimension yet ask it to remain it's strongest, straightest and most durable." Bill Sweetland

Offline Jason R. Wesbrock

  • Trad Bowhunter
  • **
  • Posts: 2507
Re: serving material
« Reply #16 on: December 22, 2009, 08:19:00 PM »
Quote
Originally posted by Pierre Lucas:

Halo was our second choice very slick but I agree with Chad was prone to slipping on the string and hard to double serve.  

That was my experience with Halo as well -- prone to slippage. Like Fastflight, I couldn't get rid of it fast enough. One slipped serving was one too many. I was only glad that I noticed it while stump shooting instead of with a broadhead on my arrow and a deer downrange.

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©