I recieved the Green Mountain longbows yesterday. Both are Mountain Hunters. R/D design. I shot a bit last night. One bow is actually 68". It is red cedar laminations. The other is bamboo and yew and is 66". The condition is almost new. There is alot of taper in his laminations. The grip is smaller on both of the bows than my Hills. It is a straight grip, no overlays. The 68" is smoother on the draw than the 66" with only one pound weight differnce in the bows.
They are cut about a 1/4" from center, so they are almost like a self bow as far as centershot. I like the way he did the shelf as the arrow only contacts in 2 points, kinda like the way Acadian Woods rounds the shelf.
The bows have tip overlays. The bow does have some thump to it upon release. I am shooting a high nocking point like over 1/2". I do not have the greatest release and the bow does appear to need much less spine than others of this weight (centershot outside).
The bow like 10 grains per pound. I have some fir shafts I will be building for the bow, and I will have a better picture of the shoot-ablility with the new arrows that are closer to spine. The 66" does shoot an arrow with some authority just looking at the penetration I am getting in the dirt bank I shoot into.
The guy who is a recurve shooter and likes to loose grip a bow, probably would not like these.
Topic: Green Mountain longbows (Read 971 times)
