cresting question

[term]

Going to crest some carbon ex heritage 350. I know that there is alot of good paints out there, but bohning is what I have. What ratio paint to thinner do I need to start with for the dip. I know that there is not a set amount but any help would be great, thanks   TERM

[Hot Hap]

I thin mine till it runs of the shaft and  starts dripping in about 20 seconds.
Hap

[Orion]

I usually thin Bohning stuff 1 to 2, i.e., one part thinner to two parts lacquer.

[Paul Mattson]

If you have a fresh unopened can you should not have to thin it at all.  If not, thin it enough so it drips after 15-20 seconds.

I would stay away from it for cresting.  There are better paints to crest with.