Author Topic: Purple heart (Read 344 times)

Stan the bow man · « **on:** January 30, 2010, 12:11:00 AM »

Thinking about getting some purple heart wood shafts.Making some purple heart arrs.Any experince with P.H shafts?

ckanous · « **Reply #1 on:** January 30, 2010, 08:12:00 AM »

Never seen any like that, definatly need pics!! I bet they would pack a punch, pretty dense wood isn't it?

dpowers311 · « **Reply #2 on:** January 30, 2010, 09:15:00 AM »

Make sure your tools are sharp. Purpleheart is tough on tools, it will catch, chip and splinter.

Dave

Keith Zimmerman · « **Reply #3 on:** January 30, 2010, 09:16:00 AM »

I have a Bighorn with PH limbs and riser. Pretty wood.

Stan the bow man · « **Reply #4 on:** January 30, 2010, 06:19:00 PM »

Allegheny Mountain Arrow Woods have them.I am going to order a dozen and try them out.

Tucker · « **Reply #5 on:** January 30, 2010, 06:42:00 PM »

I have some 3/8" purple heart shafts I made. The arrows turn out over 1000 grains. They about blast through anything!

Steve H. · « **Reply #6 on:** January 30, 2010, 07:02:00 PM »

3/8" should spine out at about 200# based on the teeny tiny ones I have that go 60's.

Joseph · « **Reply #7 on:** January 31, 2010, 03:59:00 AM »

you have to heat it to straighten it.

News:


LEFT HAND BOWS CLASSIFIEDS	TRAD GANG CLASSIFIEDS ACCESS	RIGHT HAND BOWS CLASSIFIEDS