Fieldpoints

[3Feathers]

Does anybody know if there is a fieldpoint for the axis and mfx bemans 9/32 heavyer than 145gr. I checked with 3rivers and kustomking with no luck.

[SlowBowinMO]

The heavy 200, 250 and 300 gr screw in field points are tapered at the rear down to 5/16".  They are bigger than your Axis but not a lot, most guys just use those.

[JRY309]

Alot of guys will foot an Axis/MFX with a piece of aluminum shaft.It will strengthen the open end of the shaft and make a 5/16" point fit more flush,and then taper the back end of the footing for easier target removal.Those heavy points are longer and put alot of leverage to crack the open end of the shaft on a glancing blow off a hard object.