Need a tight fit glue on nock?

[Bob L.]

I have a new string its a 12 strand 8125 with .024 halo serving and my mercury nocks are to loose any suggestions for some new glue ons for my woodies?
Thanks for the help

[lpcjon2]

Bob,I use the snap  on nocks from 3R page 36 top right.They are the only ones I use on my wood.

[Keefer]

Kustom King has Bear Paw in 9 colors and only $1.10 per dozen and they are just a bit tighter then most nocks in the throat and much smaller and not much finger pinch that I notice! But then again I haven't much feeling in my fingers since I severed my hand back in 85 (Log splitter/hand seperator) ...Really I thought I would have some sort of trouble with finger pinch due to that reason but the Bear Paw have worked great for me...  

[rastaman]

Would building your serving up using dental floss be an option rather than changing out your nocks? A wrap or two would probably do it.  

[poison arrow]

Build up the serving. It doesn't take much. The give and take of lost energy is more on the tighter nock side.

[Afraid a snake]

Like Keefer said you may want to try some Bear Paw.If you are needing 5/16 send me your address and I will send you a few to try.

[Bob L.]

I appreciate the advise. I shoot carbons and wood out of this bow switching often, is why I don't want to build up my serving. Afraid a snake,
thanks for the offer but I think I need 11/32 nocks.

[Encino Man]

I don't do snap on nocks. Serving comes in different diameters. I even used two layers of a smaller diameter to help with an extra small string.

[Hud]

If you heat up a tea kettle, wait until it is hot then hold the nock in the steam and pinch it, making sure it fits the string before it cools. Use a leather glove or pliers. Go easy and don't bend one side more than the other.

Depending on the color of the nock, the steam will dull the finish. Try a few and see how it works. I have used a hair dryer, but it takes longer. Optometrists have a heating unit to bend the plastic on glasses.

[BOWMARKS]

I use the AAE-Z nock they are normaly to tight so I have to sand a shade off. I use the 9/32 and 5/16 but no 11/32 I can send you some of the 5/16 if you like to try?