Author Topic: Brace Height and Aluminum shaft for a..... (Read 275 times)

**DONOTDELETE** · « **on:** May 19, 2010, 09:21:00 PM »

64" 45# Super Kodiak? I want to use a heavy head, like an Ace 200 grain....thanks.

vermonster13 · « **Reply #1 on:** May 19, 2010, 09:32:00 PM »

What's your draw length Roger?

**DONOTDELETE** · « **Reply #2 on:** May 20, 2010, 06:36:00 AM »

About 27"....I cut arrows to 28 1/2".

vermonster13 · « **Reply #3 on:** May 20, 2010, 07:48:00 AM »

Brace 7.75-8.75 1916 or 2016 will be the arrow range most likely.

Night Wing · « **Reply #4 on:** May 20, 2010, 09:36:00 AM »

If the bowstring is B-50, the bow is cut 1/8" past center and with a 7.75" brace height, with a glue on 200 grain Ace broadhead glued to a screw in 36 grain Zwickey long broadhead adapter, a 2016 should give you a very good tunable arrow. If the arrow is a little weak in spine, you might have to tweak the brace height by increasing it to 8" or more.

**DONOTDELETE** · « **Reply #5 on:** May 20, 2010, 05:12:00 PM »

Sweet....I have a bucketful of 2016's...thanks

News:

Author Topic: Brace Height and Aluminum shaft for a..... (Read 275 times)

DONOTDELETE

Brace Height and Aluminum shaft for a.....

vermonster13

Re: Brace Height and Aluminum shaft for a.....

DONOTDELETE

Re: Brace Height and Aluminum shaft for a.....

vermonster13

Re: Brace Height and Aluminum shaft for a.....

Night Wing

Re: Brace Height and Aluminum shaft for a.....

DONOTDELETE

Re: Brace Height and Aluminum shaft for a.....

Users currently browsing this topic:


LEFT HAND BOWS CLASSIFIEDS	TRAD GANG CLASSIFIEDS ACCESS	RIGHT HAND BOWS CLASSIFIEDS