Anyone shooting a PCH and a Hertige 350?

[frassettor]

I got my PCH in a couple of weeks ago and was trying to shoot the Heritage 350's with a heavier tip. Its  58" 65@28. Please post how high your  nock point is, ect... My nock point is 1/2 above center and while bareshafting they are WAY nock high (3-4 inches) I tried going to evn 5/8 above center with the same results  . I shoot with feathers on and they are fine. So if you would please list your set up with a PCH and a 350 I would appreciate it, so I can get a good starting point. By set up Im talking about nock point, arrow lenght, tip weight ect.....

[Zbearclaw]

I am shooting a 60" PSA and heritage 350.  

I am nicked about 1/2" high and shooting a 30.5" shaft, reflective wraps and 3x5" feathers, and 175gr heads with their standard inserts.

I also replaced the calf hair rest with the spider web rest.  This thing shoots darts.  My PSA is set at #55 @ 27" but I draw to #60 per my digital bow scale and measured by my clicker.

I had to go to 350 from 250 because my shafts were 29" and I occasionally tapped the front of the riser with the back of my broadheads.

Fly like darts for me.

[frassettor]

Is that 30.5" BOP?

[Bill Kissner]

Most probably the rear of your arrow is hitting the shelf and causing nock high. I have a PCH and shoot 350's. My nocking point is 7/8 high and I put the arrow under the nock set.

[frassettor]

Originally posted by Bill Kissner:
Most probably the rear of your arrow is hitting the shelf and causing nock high. I have a PCH and shoot 350's. My nocking point is 7/8 high and I put the arrow under the nock set.

I'll try that  

[big grey]

Try a double nock on string.
Good luck

[Zbearclaw]

Yep 30.5 bop.

I have always shot just around the 1/2" mark.  I think it was 9/16" on my old Mach one as well.  I started bare shaft tuning at 1" and worked my way down.

Good luck.

[frassettor]

Originally posted by Zbearclaw:
Yep 30.5 bop.

I have always shot just around the 1/2" mark.  I think it was 9/16" on my old Mach one as well.  I started bare shaft tuning at 1" and worked my way down.

Good luck.

I tried everything!! Anywhere from 3/8-1" and cannot get rid of it. This arrows flies great from my other setups! Dont know what else to do  

[cacciatore]

I have a PSAX 58" 65#-@29".The nock point is the same I have on all my bows 3/8" brace is 8 1/2".
My CE 350@29 1/4 with 100 insert and 150 point is too weak and I need a 300 spine like the GT 75/95 with same point sistem.You don't say how your arrow is long and how much weight you have up front.So your arrow can be way too stiff or too weak.