Grizzly BH screw in????

[vernon]

I haven't transition over to woodies yet and am still shooting carbons and have been looking for anyone/place that sells screw in grizzly broadheads.  I saw them somewhere awhile back on the internet but haven't been able to find them again.  I don't mind buying the insert/adapter and glueing them on but would be interested if anyone has seen them for sell in the screw in model.  thanks James

[Mike Vines]

get yourself some glue in adapters.  That is how I get up to 175 grains.  I use 25 grain inserts and 150 grain grizzlys.  there are all sorts of different weights for what ever flavor you might be looking for.

[vernon]

Thanks buddy,  yeah I don't mind gluing insert/adapters but was just curious.  Thanks for getting back to me.

[JimB]

I prefer gluing my own in also for a few reasons.There are several different weight adapters available so I can get the head/adapter weight close to what my setup calls for.I can further fine tune this weight by filing a few grains of weight off the adapter tip or if I want to increase the weight a few grains,I can add a few led shot in the hollow of the adapter before gluing.

Also,when gluing my adapters in,I can have the adaptor in my arrow and align my broadhead the way I want it which for me is horizantal.I also put them on a spinning jig at this time and make sure the point spins true as the glue is setting up.

Gluing your own in just gives you a lot of versatility over buying them already done.

[3arrows]

Glue your own to make sure inside of head is clean and spin test,no one will do it and well as the user.

[vernon]

Thanks guys, I agree with all of the above mentioned and will plan on gluing my own here shortly.  Good luck this fall.