70 gr. Glue on 2blade

[String Cutter]

Does anyone know where I could find a 2 blade 70gr. Broadheads???

[Terry Green]

I sure don't....that aint much hardware at 70 grains....whatcha got in mind for those?

[Cyclic-Rivers]

Mosquitoes   :D

[COMPOUNDLESS IN CONCRETE]

You could take a 75 grain Muzzy 4 blade and remove 2 of em.    :D

[Fishnhunt]

Magnus stinger comes in 85 grains as a 4 blade with bleeder.  You can remove the bleeder and it should get you close to 75 grains.  I dont know of any other cut on contact that will come in so low.
Good luck.

[Fishnhunt]

Just realized that you are looking for glue on.

Dunno, you might have to take a 100 grain head and grind it down.  

Theres got to be another workaround, why do you need 70 grain head?

[COMPOUNDLESS IN CONCRETE]

I didn't see glue on in the thread title either.  Sorry

[SlowBowinMO]

The Magnus 85 gr 5/16" glue on head is the lightest I can think of.

[BWD]

Don't think you are suppose to shoot a 4-blade stinger with the bleeder removed. But, could be wrong.

[String Cutter]

Well I got my New Yellowstone D shaped longbow in  43@27. Ordered 2 dozen 5/16 shafts in 30-35 spine... My thinking was that with 43#'s shooting dacron, 2 large wool silencers, and a low brace I would be just about right??? I was wrong... I know? I know?? String Cutter being wrong??!!! That's what I keep telling my Ex too..... Well anyway I cutt the arrows all the way down to 27 1/4 inches using 125 and they were still way to weak. So I ordered some 70gr. tips like Stu's Cal. said I needed... Now they fly like darts...

[Don Stokes]

Just curious, String Cutter- are you planning to hunt with that rig? Deer?

[Apex Predator]

I'd be shooting a 250 grain broadhead on the end of an Easton Epic 600 if I was shooting that bow.  Extreme FOC, thin diameter, slick finish and around 500 grains total.  They work great for deer and hogs, trust me.