3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: Bare Shaft Tuning Help, Please  (Read 350 times)

Offline sgrogg

  • Trad Bowhunter
  • **
  • Posts: 425
Bare Shaft Tuning Help, Please
« on: July 25, 2010, 12:20:00 PM »
Can I get a lil' help?  Here are my specs:

My draw = 28"
29.5" CE 350's with 50g inserts and 200g heads, total arrow weight 630g
57# recurve at 28"
Tiller even
Nock point 3/16"

Shooting at 20 yards my fletched shafts hit where I aim.  Bare shafts consistently 9" to the right.  Bare shafts nock end kicks hard to the left upon leaving the bow.  This indicates to me that my shafts are weak, however, I find that hard to believe.  Is it possible that I'm getting a false weak indication due to the arrows being much too stiff?

Thanks, sgrogg

Offline **DONOTDELETE**

  • Trad Bowhunter
  • **
  • Posts: 10441
Re: Bare Shaft Tuning Help, Please
« Reply #1 on: July 25, 2010, 12:38:00 PM »
change point weight and shoot again...

Offline Al Dean

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 690
Re: Bare Shaft Tuning Help, Please
« Reply #2 on: July 25, 2010, 01:05:00 PM »
Sounds stiff, shaft bouncing off riser.  The CE 350 is a 320 spine I believe.
TGMM Family of the Bow

Offline sgrogg

  • Trad Bowhunter
  • **
  • Posts: 425
Re: Bare Shaft Tuning Help, Please
« Reply #3 on: July 25, 2010, 01:13:00 PM »
Going lower and higher in point weight didn't help.  Seems like the 200 g point is as good as it gets.  I set up my arrows using Stu's calculator.

I experimented with nock point too.  It likes a very low nock point, 1/8".  It's ILF and the tiller is set to even.  Thanks.

Offline Canyon

  • Trad Bowhunter
  • **
  • Posts: 549
Re: Bare Shaft Tuning Help, Please
« Reply #4 on: July 25, 2010, 01:34:00 PM »
Nock fit???
A man who has nothing for which he is willing to fight;nothing he cares about more than his own personal safety;is a miserable creature who has no chance of being free,unless made and kept so by the exertions of better men than himself.

Offline sgrogg

  • Trad Bowhunter
  • **
  • Posts: 425
Re: Bare Shaft Tuning Help, Please
« Reply #5 on: July 25, 2010, 02:01:00 PM »
nock fit's OK

Offline arky714

  • Trad Bowhunter
  • **
  • Posts: 362
Re: Bare Shaft Tuning Help, Please
« Reply #6 on: July 25, 2010, 02:08:00 PM »
What is make of recurve some have more center shot than others..Dave

Offline frassettor

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 4639
Re: Bare Shaft Tuning Help, Please
« Reply #7 on: July 25, 2010, 02:11:00 PM »
I just got 5 Dozen of the 350's. Im shooting a 30 1/2" BOP arrow with a 260 tip, and a 100 brass insert. Total weight of 750 Grains. They fly great. I shoot the same arrow out of all of the bows listed below. Hope this helps
"Everything's fine,just fine". Dad

Offline GREG IN MALAD

  • Trad Bowhunter
  • **
  • Posts: 458
Re: Bare Shaft Tuning Help, Please
« Reply #8 on: July 25, 2010, 02:12:00 PM »
What is your rest material? If it's leather that could be the problem. Carbon arrows have the habit of bouncing on leather. Try velcro or a hair rest. I was having the same problem, Mike Fedora suggested(insisted) that I try a hair rest. It worked great. Also, hold the bow vertical when you bare shaft test, it makes it easier to see high-low and left-right.
I didnt miss, thats right where I was aiming

Offline Slasher

  • Trad Bowhunter
  • **
  • Posts: 732
Re: Bare Shaft Tuning Help, Please
« Reply #9 on: July 25, 2010, 02:31:00 PM »
Quote
Originally posted by GREG IN MALAD:
W Also, hold the bow vertical when you bare shaft test, it makes it easier to see high-low and left-right.
Years ago, I didn't know that... man did that make things easier...
Expect the best. Prepare for the worst. Capitalize on what comes.
                                        ~Zig Ziglar~

Offline AdamH

  • Trad Bowhunter
  • **
  • Posts: 953
Re: Bare Shaft Tuning Help, Please
« Reply #10 on: July 25, 2010, 02:36:00 PM »
Shootin CX Heritage 350's out of my Whippenstick Firestorm 57#-58# @ my draw arrows 30'' 175 grain Tip, flies like a dart, hits with a ton, total arrow wt. about 600 grn ...

Offline sgrogg

  • Trad Bowhunter
  • **
  • Posts: 425
Re: Bare Shaft Tuning Help, Please
« Reply #11 on: July 25, 2010, 03:04:00 PM »
Thanks guys for all the responses.  My rest is velcro and I've experimented a bit with moving it out.

I am holding my bow vertically.  Maybe it's my release.  Hmmm??

Offline Buckeye Trad Hunter

  • Trad Bowhunter
  • **
  • Posts: 1096
Re: Bare Shaft Tuning Help, Please
« Reply #12 on: July 25, 2010, 03:20:00 PM »
Have you tried raising your nock point.  I shoot mine at 1/2"

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©