3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: Paradox question  (Read 300 times)

Offline onemoreshot

  • Trad Bowhunter
  • **
  • Posts: 53
Paradox question
« on: September 01, 2010, 04:37:00 PM »
AT what distance does an arrow complete its paradox? I am interested in paper tuning and Ive read to get back 6ft from the paper.It seems to me that might be too close.Is the arrow still in paradox at 6ft from the bow?

Offline NorthernCaliforniaHunter

  • Trad Bowhunter
  • **
  • Posts: 1563
Re: Paradox question
« Reply #1 on: September 01, 2010, 05:07:00 PM »
I suppose it depends on the amount of paradox your arrow has to employ to get around a particular shelf. If the shelf is center cut, then there isn't much paradox to recover from. If the bow is lacking a shelf at all it may take several feet.

I'd start at 15', but that's just where I'd expect good flight from my arrows.
"...there are no words that can tell the hidden spirit of the wilderness, that can reveal its mystery, it's melancholy, and its charm." Theodore Roosevelt

Find me at ShareTheBounty

Offline cbCrow

  • Trad Bowhunter
  • **
  • Posts: 960
Re: Paradox question
« Reply #2 on: September 01, 2010, 05:07:00 PM »
I always bare shaft before I paper tune. To me the paper is a verification. Your distance is about right 6-8' to start.

Offline hvyhitter

  • Trad Bowhunter
  • **
  • Posts: 1356
Re: Paradox question
« Reply #3 on: September 01, 2010, 05:43:00 PM »
after watching arrows go through paradox almost all the way to the target on slo-mo videos I gave up on paper tuning for trad bows. Only have to be off a little to give false results....I bare shaft only now and usually dont have to do much of that.
Bowhunting is "KILL and EAT" not "Catch and Release".....Semper Fi!

Offline Ragnarok Forge

  • Trad Bowhunter
  • **
  • Posts: 3034
Re: Paradox question
« Reply #4 on: September 01, 2010, 05:53:00 PM »
I don't paper tune for trad bows either.  Bare shaft to fletched shaft field point tuning does the trick.
Clay Walker
Skill is not born into anyone.  It is earned thru hard work and perseverance.

Offline mcgroundstalker

  • Trad Bowhunter
  • **
  • Posts: 3304
Re: Paradox question
« Reply #5 on: September 01, 2010, 06:03:00 PM »
This may be another job for Stu's Dynamic Spine Calculator....... But, what do I know?  :dunno:
"Be faithful in small things because it is in them that your strength lies"

Offline Fletcher

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 4523
Re: Paradox question
« Reply #6 on: September 01, 2010, 10:50:00 PM »
Paper tuning works great for me; six feet is the right distance.  An arrow will continue to oscillate for quite a distance downrange.  They don't oscillate enough to mess with the reading in the paper, tho.
Good judgement comes from experience.  Experience comes from bad judgement.

"The next best thing to playing and winning is playing and losing."

"An archer doesn't have to be a bowhunter, but a bowhunter should be an archer."

Offline yononindo

  • Trad Bowhunter
  • **
  • Posts: 206
Re: Paradox question
« Reply #7 on: September 02, 2010, 03:13:00 AM »
Hi onemoreshot,

don`t know if this will be helpful, but it might give you some ideas.

This video shows some arrows being shot from heavy bows.
Starting up with proper matched arrows, going down with the spine until reaching the limit!!!
   

 http://www.youtube.com/watch?v=WzWrcpzuAp8&feature=channel

As stated above: It depends on a lot of things ......

How strong is your bow-
Brace height-
Split or three under-
Arrow weight and spine-
Weight in front of arrow-
Cut to center-
How smooth is your release ......... and so on ....

Anyway, as for me, I gave up about paper tuning my trad bows.

I do as Ragnarok Forge stated above.

Happy shooting

Daniel
Daniel

Happy Trails

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©